Data sets for temperature rise due to frictional heat generation during a sliding contact between an elastic particle and a rigid substrate

This dataset contains essential data from the Finite Element Method model predicting heat generation due to friction during the sliding contact between an elastic particle and a rigid substrate. Part of this data was processed and presented in an article under review for journal publication. The following is the description of the data files and the associated Figure in the original paper. 'Temp_CoeffFric_01_055.xlsx' data for temperature evolution for the nodes in the contacts and along the particle radius for various friction coefficient values (0.1-0.55). 'Temp_Load_001_01.xlsx' data for temperature evolution for the nodes in the contacts and along the particle radius for various normal load values (0.01-0.1 N). 'Temp_Vel_02_1.xlsx' data for temperature evolution for the nodes in the contacts and along the particle radius for various sliding velocity values (0.2-1 m/s). 'Temp_TC_5_100.xlsx' data for temperature evolution for the nodes in the contacts and along the particle radius for various thermal conductivity values. (i.e. 5-100 W/m K). 'Temp_HC_100_1600.xlsx' data for temperature evolution for the nodes in the contacts and along the particle radius for various thermal conductivity values. (i.e. 100-1600 J/kg K).本数据集包含有限元法（Finite Element Method）模型的核心仿真数据，该模型用于预测弹性颗粒与刚性基底滑动接触过程中因摩擦产生的热量。本数据集的部分内容已完成预处理，并收录于一篇处于期刊审稿阶段的投稿论文中。下文将对原始论文中的数据文件及配套插图进行说明： 'Temp_CoeffFric_01_055.xlsx'：存储了不同摩擦系数（0.1~0.55）下，接触节点及沿颗粒半径方向的温度演化数据。 'Temp_Load_001_01.xlsx'：存储了不同法向载荷（0.01~0.1 N）下，接触节点及沿颗粒半径方向的温度演化数据。 'Temp_Vel_02_1.xlsx'：存储了不同滑动速度（0.2~1 m/s）下，接触节点及沿颗粒半径方向的温度演化数据。 'Temp_TC_5_100.xlsx'：存储了不同热导率（即5~100 W/(m·K)）下，接触节点及沿颗粒半径方向的温度演化数据。 'Temp_HC_100_1600.xlsx'：存储了不同热导率（即100~1600 J/(kg·K)）下，接触节点及沿颗粒半径方向的温度演化数据。