Wave breaker type classification dataset

This dataset contains incident wave conditions and their corresponding wave breaker types observed in laboratory wave flume experiments. The data were used in the study "Wave Breaker Type Classification Using 3D CNNs with Sequential Video Frame Features." Column Descriptions tag: Identification number assigned to each experimental run. slope: Slope of the bottom structure installed in the wave flume. depth [m]: Water depth measured in the constant-depth region of the wave flume. T_target [s]: Target wave period specified as the input condition for the wavemaker. H_target [m]: Target wave height specified as the input condition for the wavemaker. T_measured [s]: Actual incident wave period obtained from measurements using the three-point separation method. H_measured [m]: Actual incident wave height obtained from measurements using the three-point separation method. breaker type: Type of wave breaking visually classified based on the observed wave behavior under each incident wave condition.本数据集收录了实验室波浪水槽实验中观测得到的入射波浪条件（incident wave conditions）及其对应的碎波类型（wave breaker type），相关数据曾被应用于题为《基于带时序视频帧特征的三维卷积神经网络（3D CNNs）的碎波类型分类》的研究工作。 列描述 标签（tag）：为每一次实验运行分配的识别编号。 坡度（slope）：波浪水槽中安装的底部结构的坡度。 水深（depth [m]）：在波浪水槽的等深区域测得的水体深度。 目标波周期（T_target [s]）：造波机输入条件中指定的目标波浪周期。 目标波高（H_target [m]）：造波机输入条件中指定的目标波浪高度。 实测波周期（T_measured [s]）：采用三点分离法通过实测得到的实际入射波浪周期。 实测波高（H_measured [m]）：采用三点分离法通过实测得到的实际入射波浪高度。 碎波类型（breaker type）：基于各入射波浪条件下观测到的波浪行为，通过目视分类得到的波浪破碎类型。