[VIVyD] Wind Tunnel Tests on a Slender Truncated Cone @ ULiège 2026-02

This dataset comes from an experimental study performed at the Wind Tunnel Laboratory at the University of Liège, Belgium, in February 2026. The setup consists of a slightly tapered hollow cylinder made of PLA, mounted vertically in the middle of the test section of the wind tunnel. The top of the tapered cylinder is free and the bottom is clamped to a rigid support. The dataset contains the measurements of the forces and moments at the base of the tapered cylinder under different flow conditions. Chronologically, the dataset contains the following experiments: [1] a ping test (start), [2] a sweep-up test, [3] a sweep-down test, and [4] a second ping test (end).本数据集源自2026年2月于比利时列日大学风洞实验室开展的一项实验研究。实验装置采用聚乳酸（PLA）材质制成的略带锥度的空心圆柱，将其垂直安装于风洞试验段中部；该锥柱顶端呈自由状态，底端夹紧固定于刚性支座之上。本数据集收录了不同来流条件下该锥柱底座处所受的力与力矩测量数据。按时间顺序，本数据集包含如下四项实验：[1] 起始Ping测试，[2] 升速扫掠测试，[3] 降速扫掠测试，[4] 收尾Ping测试。