ACSApplMaterInterfaces2020_12_44195_Ceamanos_Fig3

Dataset corresponding to the underlying data of PRIME scientific publications - Publication Title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions - Publication Reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 Figure 3 caption: Photomechanical response of a free-standing rectangular-shaped LCE strip (90 μm thick) with uniaxial orientation. Director along the long axis of the strip. Camera images acquired (a) before UV illumination (t = 0), (b) after 4 min of UV illumination (365 nm, 50 mW/cm2), (c) after 2 min of ceasing the UV illumination, and (d) after 30 min of blue light illumination (455 nm, 4 mW/cm2). Bending is produced toward the UV light source. UV light and blue light illuminate the same side of the film. PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010本数据集对应PRIME学术出版物的底层原始数据。 - 论文标题：面向光驱动机器人功能的快速光致机械响应四维打印液晶弹性体（Liquid Crystalline Elastomer, LCE）驱动器 - 文献出处：《ACS应用材料与界面》（ACS Appl. Mater. Interfaces）2020年，第12卷第39期，第44195页 - 文献DOI：10.1021/acsami.0c13341 图3说明：单轴取向的自立式矩形LCE条带（厚度90 μm）的光机械响应，其指向矢沿条带长轴方向。采集的相机图像分别为：(a) 紫外光照前（t = 0）、(b) 紫外光照4 min后（365 nm，50 mW/cm²）、(c) 停止紫外光照2 min后，以及(d) 蓝光光照30 min后（455 nm，4 mW/cm²）。条带向紫外光源方向弯曲，紫外光与蓝光均照射薄膜的同一侧。 PRIME：面向下一代主动式微流控器件的先进多功能打印平台（Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices，缩写为PRIME）。本项目已获得欧盟“地平线2020”研究与创新计划资助，资助协议编号：829010。