RV Investigator Voyage IN2019_T03 ADCP Data

This record describes the Acoustic Doppler Current Profiler (ADCP) data collected from the Marine National Facility RV Investigator voyage IN2019_T03, titled: "ORCA: Using the Investigator radar as a moving reference for the Australian operational radar network." The voyage took place between 22 December 2019 and 2nd January 2020 departing from Darwin (NT) and arriving in Fremantle (WA).

Data was collected during in2019_t03 for the duration of the voyage. Data was collected using UHDAS and post-processed using CODAS.

Both the RDI Ocean Surveyor 150kHz ADCP and the RDI Ocean Surveyor 75kHz ADCP were run in narrowband. Internal triggering was used.

The drop keel was at 2m below the waterline for the duration of the voyage.

See the voyage computing and instrumentation report for more details regarding data acquisition.

This dataset was processed and then archived within the CSIRO Oceans and Atmosphere (O&A) Information and Data Centre (IDC) in Hobart.

本记录描述了从澳大利亚国家海洋设施“调查者号”科考船（RV Investigator）IN2019_T03航次采集的声学多普勒流速剖面仪（Acoustic Doppler Current Profiler, ADCP）数据，该航次标题为：“ORCA：将调查者号雷达用作澳大利亚业务雷达网络的移动参考”。该航次于2019年12月22日至2020年1月2日期间进行，从达尔文（NT）出发，抵达弗里曼特尔（WA）。

在in2019_t03航次期间全程采集数据。数据通过UHDAS采集，并使用CODAS进行后处理。

RDI Ocean Surveyor 150kHz ADCP和RDI Ocean Surveyor 75kHz ADCP均以窄带模式运行，采用内部触发方式。

航次期间，吊龙骨始终位于水线以下2米处。

有关数据采集的更多详情，请参阅航次计算与仪器报告。

本数据集经处理后，存档于位于霍巴特的CSIRO海洋与大气研究所（O&A）信息与数据中心（IDC）。