曳引驱动乘客电梯监督检验收费计算数据

曳引驱动乘客电梯监督收费计算是根据电梯的具体情况，包括电梯的额定载重量、额定速度、层/站/门数等因素，来确定检验费用的金额。它能够为电梯使用单位提供合理的收费依据，为电梯检验机构提供方便准确的收费标准。1、数据采集：收集电梯额定载重量、额定速度、电梯层/站/门数、检验种类等参数。2、数据处理：首先根据额定速度v≤1，vx=0；1＜v≤1.75，vx=0.1；1.75＜v≤2.5，vx=0.15；v＞2.5,vx=2确定额定速度系数。根据额定载重量t≤1000，tx=0;1000＜t≤2000，tx=0.1;t＞2000，tx=0.15确定额定载重量系数。检验种类系数，安装监检为2，改造监检和大修监检为1.5。是否进口系数，是为1.5，否为1。3、套用算法公式计算：曳引驱动乘客电梯监督检验收费实收金额=（收费标准*（1+额定载重量系数+额定速度系数）+（【层/站/门三个参数中的最大值】-5）*80）*检验种类*是否进口，其中，【层/站/门三个参数中的最大值】如果三个参数最大值小于5则按5算。

The supervisory charging calculation for traction-driven passenger elevators determines the inspection fee amount based on specific elevator conditions, including factors such as rated load capacity, rated speed, number of floors/stations/doors, etc. It provides a reasonable charging basis for elevator user units and a convenient and accurate charging standard for elevator inspection institutions.
1. Data Collection: Collect parameters including elevator rated load capacity, rated speed, number of elevator floors/stations/doors, inspection type, etc.
2. Data Processing: First, determine the rated speed coefficient according to the following rules: when rated speed v ≤ 1, vx=0; when 1 < v ≤ 1.75, vx=0.1; when 1.75 < v ≤ 2.5, vx=0.15; when v > 2.5, vx=2. Then determine the rated load coefficient based on: when rated load t ≤ 1000, tx=0; when 1000 < t ≤ 2000, tx=0.1; when t > 2000, tx=0.15. For the inspection type coefficient, supervision inspection during installation is assigned a value of 2, while supervision inspections for renovation and major overhaul are assigned a value of 1.5. For the import coefficient, a value of 1.5 is used for imported elevators and 1 for domestic elevators.
3. Apply the algorithm formula to calculate the actual collected supervision inspection fee for traction-driven passenger elevators: the formula is (charging standard × (1 + rated load coefficient + rated speed coefficient) + (max(floors, stations, doors) - 5) × 80) × inspection type coefficient × import coefficient, where if the maximum value of the three parameters of floors, stations and doors is less than 5, it is calculated as 5.

搜集汇总

数据集介绍

特点

该数据集包含726条曳引驱动乘客电梯的监督检验收费计算数据，每日更新。数据涵盖电梯的基本信息、检验种类、收费标准等，通过特定算法规则计算检验费用，适用于电梯使用单位和检验机构。