ISSC 2022 Committee III.1-Ultimate Strength Benchmark Data

Overview

This page provides a zip file for a benchmark study by the 21st International Ship and Offshore Structures Congress (ISSC) Committee III.1-Ultimate Strength. The files include test details, drawings, material data, geospatial measurements, and results for ultimate strength tests on a newly built grillage, ATC-1 that have been generated by Naval Surface Warfare Center Carderock Division under funding from the US Navy's Office of Naval Research (ONR) Advanced Naval Platforms Division under the direction of Dr. Paul Hess. The folder “General Information” contains a detailed description of the study as well as a presentation on the experimental setup.

Folder Structure

General Information: Contains the study description, experimental setup, fabrication drawings
Phase 1: Files distributed under Phase 1 of the study, namely a CAD model (IGES and STEP) and nominal data on the grillage properties
Phase 2: Files distributed under Phase 2 of the study, namely data on measured (actual) structural properties as well as metrological data (point clouds) describing the as-constructed grillage shape
Phase 3: Files distributed under Phase 1 of the study, namely precise thickness measurements, material acceptance certificates, and tensile test results
Result: Load-shortening data for the ATC-1 grillage as well as test video
Photos: Photos of the ATC-1 grillage at various phases in the testing cycle

Release and Distribution of Data

The information is approved for public release with unlimited distribution per DoDI 5230.24. Usage of this data is unlimited. Unless required by applicable law or agreed to in writing, the data is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied and the US Government shall not be held liable for its use or misuse.

Support

Questions regarding this data should be forwarded to either:

Paul Hess, // [e-mail]
Office of Naval Research

Ken Nahshon // [e-mail]
Naval Surface Warfare Center Carderock Division

概述
本页面提供第21届国际船舶与海洋结构物大会（International Ship and Offshore Structures Congress，简称ISSC）第三分委员会III.1-极限强度专项开展的基准研究的压缩包文件。文件涵盖由美国海军水面作战中心卡德洛克分部，在美国海军研究办公室（Office of Naval Research，简称ONR）先进海军平台分部资助、保罗·赫斯博士主导下，针对新建格栅板架ATC-1开展的极限强度试验的试验细节、设计图纸、材料数据、地理空间测量结果及试验成果。“通用信息”文件夹包含本研究的详细说明，以及试验装置的演示文档。

文件夹结构
通用信息：包含研究说明、试验装置说明及制造图纸
阶段1：包含本研究第一阶段发布的文件，即格栅板架属性的CAD模型（IGES及STEP格式）与标称数据
阶段2：包含本研究第二阶段发布的文件，即实测（实际）结构属性数据，以及用于描述竣工后格栅板架外形的计量数据（点云数据）
阶段3：包含本研究第一阶段发布的文件，即精确厚度测量数据、材料验收证书及拉伸试验结果
结果：包含ATC-1格栅板架的载荷-缩短量数据及试验视频
照片：包含试验周期各阶段的ATC-1格栅板架实拍照片

数据发布与分发
本数据集已根据美国国防部指令DoDI 5230.24获批公开发布，可无限制分发。数据使用无任何限制。除非适用法律要求或书面约定，本数据集按“现状”原则分发，不提供任何形式的明示或默示担保与条件，美国政府不对数据的使用或误用承担任何责任。

技术支持
有关本数据集的疑问可联系以下任一人员：
保罗·赫斯（[e-mail]）
美国海军研究办公室
肯·纳雄（[e-mail]）
美国海军水面作战中心卡德洛克分部