The Feasibility of Beam Size Lattice Printing using Fused Filament Fabrication for Customized Insole Manufacturing_Cheng Jung

Title: The Feasibility of Beam Size Lattice Printing using Fused Filament Fabrication for Customized Insole ManufacturingAuthor: Jung Cheng  Affiliation:  National Taipei University of TechnologyDate: 2025-03-28  File: DataSet_The Feasibility of Beam Size Lattice Printing using Fused Filament Fabrication for Customized Insole Manufacturing_Cheng Jung.xlsx  

Description:  This dataset contains experimental data and analysis results related to the fabrication and evaluation of 3D-printed customized insoles using the Fused Filament Fabrication (FFF) process. The Excel file includes the following tables:

- **Table 1**: Samples modeled along with their scale and dimensions  - **Table 2**: Printing conditions for the FFF printer, including feedstock and printing parameters  - **Table 3**: Fabrication time and compression strength across different scales and printing speeds  - **Table 4**: Results of insole fabrication in this study  - **Table 5**: Changes in navicular height during the stance phase of the gait cycle  - **Table 6**: Comfort questionnaire results from user evaluations  

File Format:  All data are stored in Microsoft Excel (.xlsx) format, with clearly labeled sheets corresponding to the tables above.

Usage Notes:  - All data are self-generated and fully anonymized.  - Users are welcome to reuse the data with proper citation under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Contact:  Jung Cheng  Email: [e-mail]

Funding:  This research was supported by the National Science and Technology Council (Taiwan).

数据集标题：基于熔融长丝制造（Fused Filament Fabrication, FFF）技术的梁尺寸晶格打印用于定制化鞋垫制造的可行性研究
作者：郑炯（Jung Cheng）
作者单位：台北科技大学（National Taipei University of Technology）
日期：2025年3月28日
文件：DataSet_The Feasibility of Beam Size Lattice Printing using Fused Filament Fabrication for Customized Insole Manufacturing_Cheng Jung.xlsx

数据集描述
本数据集包含采用熔融长丝制造（Fused Filament Fabrication, FFF）工艺制备并评估3D打印定制化鞋垫的相关实验数据与分析结果。该Excel文件包含以下表格：
- **表1**：建模样本及其缩放比例与尺寸参数
- **表2**：FFF打印机的打印工况及工艺参数，包含打印耗材与具体打印参数
- **表3**：不同缩放比例与打印速度条件下的制备时长与抗压强度
- **表4**：本研究中鞋垫制备的相关结果
- **表5**：步态周期站立阶段舟骨高度的变化情况
- **表6**：用户评估的舒适度问卷结果

文件格式
所有数据均以Microsoft Excel（.xlsx）格式存储，工作表标签与上述表格一一对应且标注清晰。

使用说明
- 所有数据均为自研生成，且已完成完全匿名化处理。
- 欢迎使用者在遵循知识共享署名4.0国际许可协议（Creative Commons Attribution 4.0 International, CC BY 4.0）的前提下，注明正确出处后复用本数据集。

联系方式
联系人：郑炯（Jung Cheng）
电子邮箱：[e-mail]

资助说明
本研究受中国台湾地区科技部（National Science and Technology Council, Taiwan）资助。