H2020 Platone German Demonstrator - Use Case Setting Data

This dataset belongs to the German demonstrator of the H2020 Platone project (WP5). The dataset contain information that have been set for Use Cases (UCs) parameterization during the project phase. UC have been parameterized along a grafical user interface (GUI) named "Use Case Selector". Each parameterized UC triggered has been logged in the dataset. <strong>Background - Field Test Setup</strong> The field test setup consists of a Low Voltage (LV) community with 450 kW installed generation capacity. The power exchange between the LV grid and Medium Voltage (MV) grid takes place along a single point of common coupling (PCC). i.e., a secondary substation that includes a transformer with senors on the LV busbar, to measure the net power exchange. The community consists of 89 households, 450kW of installed PV generation capacity, a Community Battery Energy Storage (CBES) connected to the LV busbar with 300 kW and 850 kWh capacity. <strong>Definition of data:</strong> <strong>RequID</strong> - Request ID - Identifier for each triggered UC <strong>Alert</strong> - Indicates, whether UC has been executed successfull ( " "and " true" indacates successfull implementation by Energy Management System (EMS); "false" indicates that UC has not been implemented by EMS) <strong>Submission -</strong> timestamp of UC submission<strong> </strong> <strong>Note -</strong> Annotations entered by UseCase operator <strong>Priority -</strong> Defines UC priority set by operator (priority: 1 - high , 2 - medium, 3 - low, 4 - very low) (only relevant for UC 2) <strong>Status - </strong>Indicates the status of the UC (closed - UC has been executed, cancelled, UC has been has been canceled before or during application) <strong>Start</strong> - Point of time set for the beginning of UC <strong>End</strong> - Point of time set for the end of UC <strong>Type</strong>- Triggered Type of UC (1 - "Virtual Islanding of LV community" (UC 1); 2 - "Coordination of Flex Request" (UC 2); 3 - "Energy Import in Bulk" (UC 3); 4 - "Bulk-based Energy Export" (UC 4) <strong>Subtype</strong> - 0 - Rule-Based Operation Mode with 15-minutes control cycles of battery (CBES in the field) ;1 - Day-ahead forecast-based control; 2.0 - Schedule-based operation mode with optimization applied to a day-ahead forecast (optimization target: minimization of power exchanges at MV/LV PCC within 24h period ; 21 - Schedule-based operation mode with optimization applied to a day-ahead forecast (optimization target: minimization of power exchanges at MV/LV PCC and achieving a requested State of Charge (of CBES) at the end of UC_End; <strong>bulkStart</strong> - Point of time of start of energy bulk import or export (only relevant for UC 3 and 4) <strong>bulkEnd</strong> - Point of time of end of energy bulk import or export (only relevant for UC 3 and 4) <strong>bulk Energy</strong> - Amount of energy triggered to be imported or exported as bulk (only relevant for UC 3 and 4) <strong>Final_SOF </strong>- State of Charge (SOC) of CBES that should be achieved at end of UC (End) <strong>FlexDemand </strong>- Requested power exchange that should be achieved at MV/LV PCC (Only relevant for UC 2) <strong>Ptcb - </strong>Measured CBES charging power at poin of time of UC submission <strong>Ptei </strong>- Measured power exchange at PCC at point of time of UC submission <strong>SoC </strong>- State of Charge of CBES at point of time of UC submission <strong>SoE</strong> - State of Energyof CBES at point of time of UC submission <strong>ActiveSet </strong>- State of Energyof CBES at point of time of UC submission <strong>maxSoC </strong>- Maximum SoC set for CBES at point of time of UC submission <strong>minSoc - </strong>MinimumSoC set for CBES at point of time of UC submission This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 864300.