RO-C-NAVCAM-2-EXT1-MTP026

Data Set history: This data set is version V1.1. The changes from the V1.0 are listed below: Full size BROWSE images target names and types revised, mainly for CALIBRATION of V1.0 correction in min/max pixel value which affected some images updated EAICD version GEO_NAVCAM*_INDEX and NAVCAM*_INDEX added into the INDEX directory. Data Set Overview: The data from the Rosetta Navigation Camera (NavCam) was extracted by Bernhard Geiger; the data set was constructed and submitted by Maud Barthelemy on behalf of the Planetary Science Archives (PSA). The data have been observed and measured from 9th Feb 2016 to 8th Mar 2016. The frequency of the navigation slots was of one 2x2 raster every five hours, with interruption by manoeuvres. 524 images were taken. In addition 285 context images and 10 calibration ones were taken, which makes a total of 819 images. There is no lost or incomplete navigation images. There is no lost context images but two context images have been taken with lost rows due SSMM slow link at Cebreros. The orbiter was first executing far flyby arcs with distance ranging from 52km to 32km. The phase angle was between 60 and 70degrees. Around Feb, 24th a transition to terminator plane and insertion to bound orbits were executed. This allowed to decrease the distance to 17km at the end of the MTP. All images in this data set are raw and uncalibrated data taken using the imaging mode. The data set contains images resolved using both NavCams onboard the Rosetta S/C and the DATA directory is organised to reflect this with two sub directories: CAM1 CAM2 CAM2 directory is only present if CAM2 observations are done. Afte truncated!, Please see actual data for full text [truncated!, Please see actual data for full text]