Test data for uniaxial creep on material ALLOY 800H at 800 Celsius and a stress of 33.94 MPa (repeat test)

The creep rupture data in this collection were determined for the high temperature reactor projects (the direct cycle helium turbine project, the nuclear process heat project and the district heating project) of the Federal Republic of Germany and the State of North Rhine Westphalia, the aim being to qualify the candidate constructional alloys for service at temperatures up to 950°C. Several batches of each alloy were investigated and special attention was given to the effects of the service environments (helium containing different impurity gases, such as hydrogen, water vapour, carbon monoxide and methane, all at microbar levels, and methane reforming gas mixture) on the properties. In the test machines, these test environments led to carburisation of test pieces. However, analysis of the data showed that the stress rupture data for tests in air, in impure helium and in methane reforming gas lay in the same scatterband at each temperatures tested.

The data were used for the formulation of draft nuclear design rules for the high temperature reactor systems, which are summarised in 'Proceedings of the Workshop on Structural Design Criteria for HTR', G Breitbach, F Schubert, H Nickel, Jül-Conf-71, April 1989, Berichte der Kernforschungsanlage Jülich GmbH, ISSN 0344-5798.

本数据集收录的蠕变断裂数据（creep rupture data）源自德意志联邦共和国与北莱茵-威斯特法伦州的高温反应堆项目（high temperature reactor projects），包括直接循环氦气涡轮机项目、核工艺供热项目及区域供热项目。其研究目的是对候选结构合金（constructional alloys）进行合格性评定，以验证其在高达950°C温度下的服役能力。研究针对每种合金的多批次试样展开，重点考察了服役环境（含氢、水蒸气、一氧化碳、甲烷等微巴级杂质气体的氦气，以及甲烷重整气体混合物）对材料性能的影响。在试验机中，这些测试环境导致试样发生渗碳（carburisation）；然而数据分析表明，在所有测试温度下，空气、含杂质氦气及甲烷重整气体环境中的应力断裂数据（stress rupture data）均处于同一分散带（scatterband）内。

该数据集被用于制定高温反应堆系统的核设计规则（nuclear design rules）草案，相关内容汇总于《高温反应堆结构设计准则研讨会论文集》（Proceedings of the Workshop on Structural Design Criteria for HTR），作者为G Breitbach、F Schubert、H Nickel，会议编号Jül-Conf-71，1989年4月，于利希核研究中心报告（Berichte der Kernforschungsanlage Jülich GmbH），ISSN 0344-5798。