IPCC DDC: NIMS-KMA KACE1.0-G model output prepared for CMIP6 ScenarioMIP ssp370

Project: Coupled Model Intercomparison Project Phase 6 (CMIP6) datasets - These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue: http://www.geosci-model-dev.net/special_issue590.html). The simulation data provides a basis for climate research designed to answer fundamental science questions and serves as resource for authors of the Sixth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC-AR6). CMIP6 is a project coordinated by the Working Group on Coupled Modelling (WGCM) as part of the World Climate Research Programme (WCRP). Phase 6 builds on previous phases executed under the leadership of the Program for Climate Model Diagnosis and Intercomparison (PCMDI) and relies on the Earth System Grid Federation (ESGF) and the Centre for Environmental Data Analysis (CEDA) along with numerous related activities for implementation. The original data is hosted and partially replicated on a federated collection of data nodes, and most of the data relied on by the IPCC is being archived for long-term preservation at the IPCC Data Distribution Centre (IPCC DDC) hosted by the German Climate Computing Center (DKRZ). The project includes simulations from about 120 global climate models and around 45 institutions and organizations worldwide. Summary: These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.ScenarioMIP.NIMS-KMA.KACE-1-0-G.ssp370' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The KACE1.0-GLOMAP climate model, released in 2018, includes the following components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N96; 192 x 144 longitude/latitude; 85 levels; top level 85 km), land: JULES-HadGEM3-GL7.1, ocean: MOM4p1 (tripolar primarily 1deg; 360 x 200 longitude/latitude; 50 levels; top grid cell 0-10 m), seaIce: CICE-HadGEM3-GSI8 (tripolar primarily 1deg; 360 x 200 longitude/latitude). The model was run by the National Institute of Meteorological Sciences/Korea Meteorological Administration, Climate Research Division, Seoho-bukro 33, Seogwipo-si, Jejudo 63568, Republic of Korea (NIMS-KMA) in native nominal resolutions: aerosol: 250 km, atmos: 250 km, land: 250 km, ocean: 100 km, seaIce: 100 km.

项目名称：耦合模式比较计划第六阶段（Coupled Model Intercomparison Project Phase 6, CMIP6）数据集——本数据集为国际协调推进的耦合模式比较计划第六阶段（CMIP6；详见《地球科学模式发展》特刊：http://www.geosci-model-dev.net/special_issue590.html）的产出成果。此类模拟数据为解答核心科学问题的气候研究提供了基础支撑，同时可为政府间气候变化专门委员会第六次评估报告（Intergovernmental Panel on Climate Change Sixth Assessment Report, IPCC-AR6）的作者群体提供研究资源。CMIP6由世界气候研究计划（World Climate Research Programme, WCRP）下属的耦合模式工作组（Working Group on Coupled Modelling, WGCM）协调牵头。第六阶段继承了此前由气候模式诊断与比较计划（Program for Climate Model Diagnosis and Intercomparison, PCMDI）主导开展的各阶段工作基础，依托地球系统网格联合会（Earth System Grid Federation, ESGF）、环境数据分析中心（Centre for Environmental Data Analysis, CEDA）及众多相关配套活动完成项目实施。原始数据存储于联邦式数据节点集群并实现部分镜像备份，IPCC引用的绝大多数数据将由德国气候计算中心（German Climate Computing Center, DKRZ）托管的IPCC数据分发中心（IPCC Data Distribution Centre, IPCC DDC）进行长期归档保存。本项目涵盖全球约120个全球气候模式及45家科研机构与组织提交的模拟试验数据。
数据集概况：本数据集包含IPCC第六次评估报告第一工作组（Working Group I, WGI）作者所使用的数据子集，该子集源自ESGF平台发布的`CMIP6.ScenarioMIP.NIMS-KMA.KACE-1-0-G.ssp370`数据集，其完整数据引用语法遵循模板：`mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version`。于2018年发布的KACE1.0-GLOMAP气候模式包含以下组成模块：气溶胶模块：UKCA-GLOMAP-mode；大气模块：MetUM-HadGEM3-GA7.1（N96格点；经纬度分辨率192×144，共85层垂直结构，顶层高度85 km）；陆面模块：JULES-HadGEM3-GL7.1；海洋模块：MOM4p1（极坐标型，基础分辨率约1°，经纬度格点360×200，共50层垂直结构，表层网格深度范围0~10 m）；海冰模块：CICE-HadGEM3-GSI8（极坐标型，基础分辨率约1°，经纬度格点360×200）。该模式由韩国济州岛西归浦市西湖北路33号韩国气象厅国立气象科学研究院气候研究部（NIMS-KMA）以标称原生分辨率运行：气溶胶模块分辨率250 km，大气模块250 km，陆面模块250 km，海洋模块100 km，海冰模块100 km。