Improved simultaneous LET and dose measurements in proton beams of clinical relevancy using Al2O3:C OSL detectors

Measurements of optically stimulated luminescence detectors (OSLDs) irradiated with protons at a wide range of doses and linear energy transfers (LETs), along with Monte Carlo simulations of the experiments to demonstrate the LET measurement capabilities of Al2O3:C.

The data is used to produce the results presented in the paper titled "Improved simultaneous LET and dose measurements in proton beams of clinical
relevancy using Al2O3:C optically stimulated luminescence detectors", herein referred to as the "paper".

Four irradiations were used for the experiments and simulated as detailed in the paper in table 1:
* field "d1" being the dose calibration
* field "f1", a 70 MeV single energy layer
* field "f2", a small spread-out Bragg peak (SOBP)
* field "f3", a wider SOBP
Data provided in this repository are labelled according to these fields (d1, f1, f2, or f3).

Three types of data files are given, where the data structure is descried in the section below:
1) the raw zipped OSL data after the OSLDs were read out with the Risoe reader in pulsed mode.
The data are stored according to the field names above and can be processed with e.g. the R Luminescence package or the Risoe Software.

2) a data frame "OSLD_Al2O3C_df.xlsx" where the OSLD data has been processed and split into UV and blue emissions.
Each line with the OSLD information further show the irradiation parameter, e.g. information about the readout time for the fading analysis,
OSLD position along the central beam axis, field name, and OSLD package name to group the data.

3) the Monte Carlo LET and dose simulations are provided in "Monte_Carlo_dataframes.xlsx".
The names of the four spread sheets refer to the field names defined above and in table 1 in the paper.

对受不同剂量和线性能量转移（LETs）的质子辐照的发光光子探测仪（OSLDs）进行测量，并伴随蒙特卡洛模拟实验，以展示Al2O3:C材料在LET测量方面的能力。该数据集用于生成论文《利用Al2O3:C光子激发发光探测器在临床相关质子束中实现改进的同时LET和剂量测量》中的结果，以下简称‘论文’。实验中使用了四种辐照方式，并在论文表1中详细描述，包括：
* 字段“d1”，用于剂量校准
* 字段“f1”，一个70 MeV的单能层
* 字段“f2”，一个小的展宽布拉格峰（SOBP）
* 字段“f3”，一个更宽的展宽布拉格峰
本仓库提供的数据按照这些字段（d1、f1、f2或f3）进行标记。提供了三种类型的数据文件，其数据结构在以下章节中描述：
1）使用Risoe读数器在脉冲模式下读取OSLDs后的原始压缩OSL数据。数据根据上述字段名称存储，可以使用例如R发光包或Risoe软件进行处理。
2）一个名为“OSLD_Al2O3C_df.xlsx”的数据框，其中已处理OSLD数据并分为紫外和蓝色发射。每行包含OSLD信息的记录进一步显示了辐照参数，例如关于读出时间以进行衰减分析的信息，OSLD沿中心束轴的位置，字段名称以及OSLD包名称以分组数据。
3）蒙特卡洛LET和剂量模拟提供在“Monte_Carlo_dataframes.xlsx”中。四个工作表的名称参照上述定义的字段和论文表1中的字段。