Physical oceanography during UTHÖRN cruise UT201606 (HAB-DK/Limfjord)

Data presented here were collected during the cruise UT201606 (Project HAB DK/Limfjord) with the RV Uthörn from Bremerhaven to Bremerhaven (June 13, 2016 to June 30, 2016) , with station work in the German Bight, the Limfjord and the Baltic Sea. In total, 44 vertical CTD-hauls were conducted. The CTD system used was a Sea-Bird Electronics Inc. SBE 19plus, attached to a SBE 55 Carousel Water Sampler containing 6 x 4-liter bottles. The system was equipped with: single temperature and conductivity probe (SBE 7245), a pressure sensor (Digiquartz), and a fluoroscence sensor (Wetlabs FLNTU, SN 0773). The sensors were pre-calibrated by the manufacturers. The data were recorded with the Seasave 7.22.2 software and processed using SeaBird SBE Data Processing software. Data were despiked, and also visually checked. The ship position was derived from the shipboard GPS-system. The time zone is given in UTC.

本数据集采集自UT201606航次（HAB DK/利姆海峡项目），搭载RV Uthörn号科考船执行不来梅哈芬往返航次（2016年6月13日至6月30日），在德国湾、利姆海峡与波罗的海布设科考站位并开展作业。本次航次共完成44次垂直CTD（温盐深剖面仪）拖曳采样。所用CTD系统为Sea-Bird Electronics公司生产的SBE 19plus型设备，配套搭载SBE 55型旋转式采水器，该采水器含6个4升采样瓶。该系统配备如下组件：单通道温度与电导率探头（SBE 7245）、压力传感器（Digiquartz）以及荧光传感器（Wetlabs FLNTU，序列号SN 0773）。所有传感器均由厂商完成预校准。数据通过Seasave 7.22.2软件记录，并使用SeaBird SBE数据处理软件进行后处理。数据已完成野值剔除，并经过目视检查。船舶位置通过船载GPS系统获取。数据采用UTC（协调世界时）时区。