Biorig logger data

Biorig logger data for mains and stormwater rigs at Mawson Lakes site for the Infrastructure and Aesthetics component of the MARSUO Project.\nLineage: Inlet and return water temperatures were monitored by T-type mineral insulated metal sheathed stainless steel thermocouples 3mm – TC Measurement and Control (±1%). pH was monitored using SensoreX pH electrodes - flat surface CPVC (±10%). Electrical conductivity was monitored using Thermo Fisher Scientific Alpha Cond 500 connected to a Thermo Fisher Scientific stainless steel conductivity electrode (±5%) and SensoreX ORP electrode sensors (±10%) monitored redox potential. Amplification of pH and ORP sensor signals was via Heaston Electronics self powered pH pre amplifiers (PHAMP-A30). Data was logged at 5 minute intervals using a DT85 DataTaker logger. Remote connection to the logger was made using a NetComm Ltd industrial router (NTC-6908) fitted with a Telstra 3G SIM card. Remote web access to the logger (for data transfer) was via DataTaker deX software through the internet using a dynamic DNS Host (dyndns.com).

MARSUO项目基础设施与美学组件项下，莫森湖（Mawson Lakes）场地内市政供水与雨水处理装置的Biorig型数据记录仪日志数据。
数据溯源：进水与回水温度采用T型矿物绝缘金属护套不锈钢热电偶（thermocouple，直径3mm，TC Measurement and Control公司出品）监测，测量误差为±1%；pH值采用SensoreX品牌CPVC材质平面型pH电极（pH electrode）监测，测量误差为±10%。电导率监测采用赛默飞世尔科技（Thermo Fisher Scientific）Alpha Cond 500电导仪，搭配其不锈钢电导电极（conductivity electrode），测量误差为±5%；氧化还原电位则通过SensoreX品牌ORP电极传感器（ORP electrode sensor）监测，测量误差为±10%。pH与ORP传感器的信号放大采用Heaston Electronics公司的自供电pH前置放大器（PHAMP-A30）。数据采集间隔设为5分钟，采用DT85型DataTaker数据记录仪（data logger）完成数据存储。通过内置Telstra 3G SIM卡的NetComm有限公司工业级路由器（NTC-6908），实现与数据记录仪的远程连接；借助DataTaker deX软件，通过动态DNS主机（dyndns.com）经互联网，实现数据记录仪的远程网页访问，用于数据传输。