EZ Soprano Lofi 6 In 1

**An example of 3D model generated with my Gugulele OnShape script…** STL is low resolution so it loads in browsers. Contact me for hifi version. * Decorative headless design * Single rectangular through-body spine * Off sided oval sound hole * T-Bracing * Banjo style or Goth UPT planetary tuners * 6 pieces to be assembled using M1.6 socket head screws and/or glue * No piece longer than 250mm so printable on common 3D printers If you've successfully printed and assembled one, let me know :-) **Third Party Parts:** * Spine/rods e.g. http://www.acpsales.com/.125-x-.325-Rectangular-Rod.html * Banjo Tuners e.g. http://www.amazon.com/dp/B018AWABJ4 or http://www.ebay.com/itm/361528177703 * or Gotoh UPT Tuners e.g. http://www.theukulelesite.com/gotoh-upt-tuner-upgrade.html * Screws (M1.6x4mm) for body e.g. https://www.amazon.com/M1-6x4mm-0-35mm-Pitch-Socket-100pcs/dp/B00XP4ZWY2 * Screws (M1.6x10mm) for fretboard long holes e.g. https://www.amazon.com/Socket-Screws-100-piece-Stainless-Thread/dp/B01H225A3U/ Source: Objaverse 1.0 / Sketchfab

**基于我编写的Gugulele OnShape脚本生成的3D模型示例……**
该模型采用低分辨率STL格式，可在浏览器中快速加载。如需高保真版本，请联系我。
· 采用无琴头装饰性设计
· 单矩形贯穿式琴身通梁
· 偏心椭圆形音孔
· T形音梁（T-Bracing）
· 班卓琴风格或哥特式UPT行星式弦轴
· 整套共6个零件，可通过M1.6内六角螺钉或胶粘剂进行组装
· 单零件最大长度不超过250mm，可在通用3D打印机上完成打印

若您成功打印并组装了该模型，欢迎与我分享反馈😊

**第三方配件：**
· 通梁/杆件：示例链接：http://www.acpsales.com/.125-x-.325-Rectangular-Rod.html
· 班卓琴弦轴：示例链接：http://www.amazon.com/dp/B018AWABJ4 或 http://www.ebay.com/itm/361528177703
· 或Gotoh UPT弦轴：示例链接：http://www.theukulelesite.com/gotoh-upt-tuner-upgrade.html
· 琴身用螺钉（M1.6×4mm）：示例链接：https://www.amazon.com/M1-6x4mm-0-35mm-Pitch-Socket-100pcs/dp/B00XP4ZWY2
· 指板长孔用螺钉（M1.6×10mm）：示例链接：https://www.amazon.com/Socket-Screws-100-piece-Stainless-Thread/dp/B01H225A3U/

**数据来源：** Objaverse 1.0 / Sketchfab