Graphic cadastre of the Municipality of Gestel

The cadastre plan is an administrative document that proposes the only large-scale parcel plan covering the national territory. The plan of a commune’s cadastre is divided into sections, which can be divided into subdivisions of sections, commonly referred to as “plan sheets”. — The cadastral section is a part of the communal territory whose perimeter is usually made up of boundaries of relatively stable character on the ground (road, roads, watercourses...). — The plot is the basic cadastral unit. It is a single-contained plot located in the same place and belonging to the same owner. — The plan of the cadastre in vector format derives mainly from the digitisation of the cadastral plan paper or raster carried out in the framework of agreements with local and regional authorities. To a lesser extent, it was produced directly in digital format in the context of the production of new cadastral plans (recasting procedure provided for by Law No 78-645 of 18 July 1974) or agricultural and forestry land development (commonly referred to as “rememberments”). Cadastral plans in vector format in metropolitan France are currently georeferenced in the legal system (RGF93) using “conical 9 zones compliant” projections. Georeferencing of vector plans could be obtained: — during their making (in the case of very recent cadastral plans); — after conversion of their coordinates expressed in the Lambert zones projection; — during vectorisation (cases not initially georeferenced) **Collection context** The cadastral plans in vector format managed and exported by the DGFiP services were produced from the other field. Depending on the plan sheets, vectorisation and georeferencing conditions are diverse. This information is available on the fact sheets of each of the municipalities. **Collection method** The cadastral plans in vector format managed and exported by the DGFiP services were produced from the other field. Depending on the plan sheets, vectorisation and georeferencing conditions are diverse. This information is available on the fact sheets of each of the municipalities. Cadastral plans are of several types: —updated plans: these are cadastral plans updated from the frame of the Napoleonic cadastral plans. They're not regular plans. These plan sheets are identifiable by their single letter section (e.g. “section A”). The scales of plan sheets can be variable and are mainly at the following scales: 1/1250, 1/2500 and 1/5000; — ‘regular’ plans: these are plans that were made during the renovation of the cadastre without repeating the pattern of Napoleonic plans. Among these plans, there are two categories: — the so-called “renewed” plans: these are plans which have not been the subject of a conflicting delimitation of the properties on the ground when they were drawn up; — “remade” plans which have been subject to conflicting demarcation of properties; Where the cadastral plan is no longer able to meet the needs (in particular because of its scale or its possible inaccuracy), it may be redrafted in accordance with the ‘reshuffle’ procedure laid down by Law No 78-645 of 18 July 1974. Cadastral plans resulting from land development operations are referred to as “remembered plans”. The identifier of a plan sheet is of the form: “DDCCCPPPSSNN” where: — “DD” is the number of the department; — “CCC” means the INSEE code of the municipality; — “PPP” is the section prefix. By default this prefix is equal to “000” except in the following cases: — in case of absorption of a commune, this prefix shall have the value of the INSEE code of the absorbed municipality; — in the case of municipalities in arrondissements, this prefix contains the district code (for Paris from 101 to 120, for Lyon from 381 to 389, for Marseilles from 201 to 216, in the case of the city of Toulouse, this is the district code taking the values from 801 to 846). — “SS” is the designation of the section “cadastrale” (in case of a single section letter, the section letter is preceded by the number “0” e.g. “section 0A”); — “NN” is the sheet number (“01” by default) For more information, see [the metadata on the Isogeo catalog](https://open.isogeo.com/s/0bd17a2a330842c68ec4a412d1df6824/AiCyPK6W8fg012l-vHV0s5tPry5b0/r/8581b956278748f7908bb5ea7b3ebe7c).地籍图（cadastre plan）是一份行政文书，亦是覆盖全国领土的唯一大比例尺宗地总图。 市镇地籍图划分为地籍区段，区段可进一步细分为区段子单元，通常称为“图幅”。 —— 地籍区段：属于市镇领土的一部分，其边界通常由地面上性质相对稳定的地物构成，如道路、水道等。 —— 宗地（plot）：地籍基本单元，指位于同一区位、归属同一所有权人的单一封闭地块。 矢量格式地籍图主要源自与地方及区域当局合作开展的纸质或栅格地籍图数字化工作；另有小部分矢量地籍图是在新编地籍图（依据1974年7月18日第78-645号法律规定的重编流程）或农林土地开发项目（通常称为“记要图”）的制作过程中直接以数字格式生成的。 法国本土的矢量格式地籍图目前采用符合“9带圆锥投影”的坐标系统，以法定大地坐标系RGF93进行地理配准。矢量图的地理配准可通过以下三种方式实现： —— 成图阶段（针对极新的地籍图）； —— 将兰伯特分带投影下的坐标进行转换后完成配准； —— 数字化阶段（针对初始未进行地理配准的图件）。 **采集背景** 由法国公共财政总局（DGFiP）服务团队管理并导出的矢量格式地籍图，其数据源均源自前述作业流程。根据图幅的不同，数字化与地理配准的具体条件存在差异，相关信息可查阅各市镇的概况文档。 **采集方法** 由法国公共财政总局（DGFiP）服务团队管理并导出的矢量格式地籍图，其数据源均源自前述作业流程。根据图幅的不同，数字化与地理配准的具体条件存在差异，相关信息可查阅各市镇的概况文档。 地籍图可分为以下几类： —— 更新版地籍图：以拿破仑地籍图图廓为基础进行更新的地籍图，不属于常规地籍图。此类图幅可通过其单个字母的区段标识（如“区段A”）进行识别。图幅比例尺可变，主要比例尺为1/1250、1/2500及1/5000； —— “常规”地籍图：在地籍更新过程中编制、未沿用拿破仑地籍图图式的图件。此类图件又可分为两类： —— 所谓“更新型”地籍图：编制过程中未涉及地面权属界址的冲突性划定； —— “重制版”地籍图：编制过程中曾开展权属界址的冲突性划定工作。 当地籍图无法再满足使用需求（尤其是受限于比例尺或精度不足时），可依据1974年7月18日第78-645号法律规定的“重编流程”进行重新编制。 由土地开发项目产生的地籍图被称为“记要图”。 图幅标识符采用“DDCCCPPPSSNN”格式，各部分含义如下： —— “DD”：省份编号； —— “CCC”：市镇的法国国家统计与经济研究所（INSEE）代码； —— “PPP”：区段前缀，默认值为“000”，以下情形除外： —— 若某市镇被并入其他市镇，该前缀将使用被并入市镇的INSEE代码； —— 若为区辖市镇，该前缀包含区代码（巴黎为101至120，里昂为381至389，马赛为201至216；图卢兹市的区代码取值范围为801至846）； —— “SS”：地籍区段标识，若区段标识为单个字母，需在字母前添加数字“0”，例如“区段0A”； —— “NN”：图幅编号（默认值为“01”）。 如需了解更多信息，请参阅[Isogeo目录元数据](https://open.isogeo.com/s/0bd17a2a330842c68ec4a412d1df6824/AiCyPK6W8fg012l-vHV0s5tPry5b0/r/8581b956278748f7908bb5ea7b3ebe7c)。