CRAWDAD tools/collect/location/loclib

Loclib - a collection tool for 802.11-based positioning systems.Loclib is a research tool for 802.11-based positioning systems. Loclib is a connector between applications and sensor hardware. Its task is to collect data from the sensor hardware and pre-process it for further usage.Lastmodified :2007-12-05Dataname :tools/collect/location/loclibFile :loclib-0.7.5.tar.gz, loclib-spbm-0.1.jar, loclib-spbm-0.1.tar.gz, loclib.src.tar.gzReleasedate :2007-09-14Change :the initial version.References :king-tools
The Loclib websiteWebsite :http://www.informatik.uni-mannheim.de/pi4.data/content/projects/loclib/loclib.htmlKeyword :802.11
Bluetooth
GPS
location
signal strengthLicense :This tool is released under the GNU General Public License.
Please respect our work and abide the license.Output :See "usage" for details.Parameters :See "usage" for details.Usage :1. NMEA-0183

A library compliant to the NMEA-0183 (Version 2.2) standard is part of Loclib.
The NMEA library is specifically optimized for GPS receivers based on the SiRF
II chipset. However, the library may work with other NMEA-0183 compliant devices
as well.

Invoke Loclib with the following command to display the information provided
by the GPS receiver:

java -cp loclib-0.7.5.jar:debug-disable-1.1.jar:hexdump-0.1.jar:libdbus-java-2.3.1.jar:unix-0.2.jar:j2meunit.jar:locutil1-0.5.1.jar org.pi4.loclib.nmea0183.test.SerialGpsTestToStringUsage :2. Wireless LAN

Our Wireless LAN implementation supports Active and Passive Scanning as well as
Monitor-Sniffing. Monitor-Sniffing has been proposed by us and is discussed
in the research paper "Wiretapping the Wireless Interface for 802.11-based
Positioning Systems". To get Monitor-Sniffing to work, a Wireless LAN network
card is required that supports monitor mode.

You can start a test program that actively scans for neighboring access points
by invoking the following command:

java -Djava.library.path=./ -cp loclib-0.7.5.jar:debug-disable-1.1.jar:hexdump-0.1.jar:libdbus-java-2.3.1.jar:unix-0.2.jar:j2meunit.jar:locutil1-0.5.1.jar org.pi4.loclib.wirelesslan.test.ScanTest

Please adjust the java.library.path accordingly.
The test program works only under Linux or *BSD operation systems. It actively
scans for access points using interface eth0 and prints detail information about
the presence and signal strength quality of access points in communication range.Usage :3. Bluetooth

A so-called proximity-based Bluetooth location system is part of Loclib.
This kind of location systems have been proposed by many researchers and
they work as follows: the position of a mobile device is derived from
the access points in communication range by averaging their positions.

Our implementation requires the BlueZ Bluetooth stack and a Linux or *BSD operating system.

Replace the MAC addresses and coordinates stored in the bluetoothlocationdata.txt file
with the values of the Bluetooth access points in your vicinity.
Modify the loclib.properties, so that "provider=Bluetooth" is set.
After that, invoke Loclib with the following command:

java -cp loclib-0.7.5.jar:debug-disable-1.1.jar:hexdump-0.1.jar:libdbus-java-2.3.1.jar:unix-0.2.jar:j2meunit.jar:locutil1-0.5.1.jar org.pi4.loclib.test.LocationProviderTestUsage :4. Digital Compass

We have implemented the communication protocol for the F350-Compass-RD
digital compass manufactured by Silicon Laboratories. The compass provides
information about azimuth, current temperature and inclination of the compass
on X- and Y-axis.

The declination angle must be set correctly. You can start a test program
by invoking the following command:

java -cp loclib-0.7.5.jar:debug-disable-1.1.jar:hexdump-0.1.jar:libdbus-java-2.3.1.jar:unix-0.2.jar:j2meunit.jar:locutil1-0.5.1.jar org.pi4.loclib.f350compassfd.test.CompassTest

The test program continously requests and receives data from the compass
and prints it to the screen.

As the compass package is not covered by the Location API, we encourage you
to use the InputOutputHandler class as a front-ending if you want to use
the compass package along with your own source code. The class that uses
the InputOutputHandler is then supposed to implement the CompassListener
interface in order to handle incoming messages. A detailed description is
also available that discusses how to use the classes and interfaces.Usage :5. Application: FDDD

FDDD (Fingerprint Database Distribution Demonstrator) is a demo application
that illustrates algorithms for distributing fingerprints for 802.11-based
positioning systems among mobile devices.

To invoke FDDD execute the following command:

java -cp loclib-0.7.5.jar:debug-disable-1.1.jar:hexdump-0.1.jar:libdbus-java-2.3.1.jar:unix-0.2.jar:j2meunit.jar:locutil1-0.5.1.jar -Djava.library.path=PATH_LOCLIB_JNI -Djava.security.policy=PATH_FDDD/rmi.policy -jar fddd-0.5.jar

The words in upper case are placeholders:

- PATH_LOCLIB_JNI defines the path to the Loclib jni directory
- PATH_FDDD defines the path where the FDDD code is storedUsage :6. Application: SPBM

SPBM (Scalable Position-Based Multicast) is a multicast routing protocol
for mobile ad-hoc networks. It uses the positions of the nodes in the network
to forward data packets. Loclib can be used to provide the SPBM kernel module
with coordinates derived from the current GPS position.

loclib-spbm requires four command line arguments:

Latitude of the origin of the SPBM coordinate system (in degrees)
Longitude of the origin of the SPBM coordinate system (in degrees)
Step width along the x axis of the SPBM coordinate system (in degrees)
Step width along the y axis of the SPBM coordinate system (in degrees)

For example, if you want to use SPBM in the city of Mannheim (Germany),
you have to run loclib-spbm as follows:

java -jar loclib-spbm-0.1.jar 49.3 8.5 0.0001 0.0001Algorithm :1. Overview

Loclib is a connector between applications and sensor hardware. Its task is
to collect data from the sensor hardware and pre-process it for further usage.

On the application side it offers two types of front-ends: The well-known
Location API to access position estimates, and so-called handlers that provide
access to sensor-specific data (e.g., signal strength values of neighboring access points).
On the sensor hardware side, it communicates directly with hardware drivers
to access sensor information that would otherwise be hidden. Loclib focuses
not only on 802.11, it also contains a GPS part that is able to talk
to NMEA-0183-enabled GPS devices as well as a digital compass for obtaining
direction and inclination information.

2. Architecture

As already mentioned in the previous section, Loclib interconnects sensor hardware
and applications by gathering sensor-specific data and converting it into location
information if required. Loclib is organized in three layers:

- Sensor-specific data collection layer
- Data conversion layer
- Location application programming interface layer

The sensor-specific data collection layer gathers data from different sensor hardware.
At the moment, Loclib is able to retrieve data from 802.11 wireless LAN network cards,
NMEA-enabled GPS receivers, and digital compasses. To collect data, drivers can be
accessed, or if it is feasible Loclib communicates directly with the sensor in question.
For instance, digital compasses are directly queried, as well as NMEA-0183 devices.
In case of 802.11 network cards, the signal strength of access points in communication
range is retrieved from the driver. The data collected from the sensor-specific data
collection layer is usually forwarded to the data conversion layer for further processing.
However, the data can also be directly accessed by using so-called handlers. Handlers
are pre-defined interfaces to allow applications such as Loctrace to access sensor-specific data.

The data conversion layer is responsible for converting data provided by the sensor-specific
data collection layer into a position estimate that can be utilized by the Location API.
To accomplish this, so far, GPS or 802.11-based positioning algorithms can be used.
The data conversion layer is able to switch between 802.11-based positioning and
GPS-based positioning if one of the sources fades out and the other is still operational.
If both positioning services are available, GPS is preferred. Should both sources of
position information be unable to deliver the required data an error code is returned
instead of a valid position.

The location application program interface layer implements the well-known and widely
used Location API to deliver location estimates to applications. This is a standardized
way to hand over location information. Especially on mobile devices, this is a wide-spread
approach to support location-based services.

3. Documentation & Tests

For software documentation purposes we mostly rely on Javadoc.
Additionally, we use JUnit tests and UML diagrams during our development process
as documentation tools.

4. Location API

We have implemented the Location API as defined in JSR-179 to provide application
developers a unified interface to location information. So far, our implementation
is not completely compliant with the standard because we focused on the features
we need. In the future, we will add missing parts.