Model outputs 1: all simulations excluding mode 2 sensitivity tests

This dataset contains the model outputs for all simulations except the mode 2 sensitivity studies. <br> <strong>Data file structure</strong> The model output files are provided in the netCDF file format (.nc). The model output filename convection is as follows: <br> depth_aerosol_temp_updraft_aINP_#.nc <br> where depth (deep or shallow) indicates the cloud depth, aerosol (natural or nearcity) indicates the aerosol size distribution, temp (cold or warm) indicates the cloud base temperature, updraft (05, 2 or 10) indicates the updraft speed, a(01,1,10)INP indicates the INP concentration, and # is a number and indicates the secondary ice production (SIP) mechanism (see details below). <br> <strong># refers to the SIP as follows:</strong> 000 control (no SIP) 001 M1 002 CB 003 M1+CB 004 M2 005 M1+M2 006 M2+CB 007 M1+M2+CB 008 RS 009 RS+M1 010 RS+CB 011 RS+M1+CB 012 RS+M2 013 RS+M1+M2 014 RS+M2+CB 015 RS+M1+M2+CB <br> For example, shallow_natural_cold_05_1INP_000.nc refers to a simulation with no SIP mechanisms with a cloud depth of 1.3 km, a natural aerosol size distribution, a cloud base temperature of 0 °C, an updraft speed of 0.5 m s^-1 and x1 INP concentration.

本数据集包含除模式2敏感性研究之外所有模拟实验的模型输出结果。<br><strong>数据文件结构</strong> 模型输出文件采用netCDF文件格式（后缀为.nc）。模型输出文件的命名规范如下：<br>depth_aerosol_temp_updraft_aINP_#.nc<br>其中，depth（取值为deep或shallow）代表云厚；aerosol（取值为natural或nearcity）代表气溶胶粒径分布；temp（取值为cold或warm）代表云底温度；updraft（取值为05、2或10，分别对应0.5 m·s⁻¹、2 m·s⁻¹和10 m·s⁻¹）代表上升气流速度；aINP（取值为01、1、10）代表冰核浓度（INP）；#为编号，代表二次冰晶生成（SIP，secondary ice production）机制（详见下文）。<br><strong>#对应的二次冰晶生成机制如下：</strong> 000 对照组（无二次冰晶生成机制）；001 M1；002 CB；003 M1+CB；004 M2；005 M1+M2；006 M2+CB；007 M1+M2+CB；008 RS；009 RS+M1；010 RS+CB；011 RS+M1+CB；012 RS+M2；013 RS+M1+M2；014 RS+M2+CB；015 RS+M1+M2+CB<br>例如，shallow_natural_cold_05_1INP_000.nc对应的模拟实验未启用任何二次冰晶生成机制，云厚1.3 km，采用天然气溶胶粒径分布，云底温度为0 ℃，上升气流速度为0.5 m·s⁻¹，INP浓度为1倍。