Simple download service (Atom) of the data package: Natural Risk Prevention Plan (PPRN) of the municipality of BELESTA

The COVADIS data standard for risk prevention plans includes all the technical and organisational specifications for the digital storage of geographical data represented in the risk prevention plans (RPPs).
The major risks consist of the eight main natural hazards foreseeable in the national territory: floods, earthquakes, volcanic eruptions, terrain movements, coastal hazards, avalanches, forest fires, cyclones and storms, and four technological risks: nuclear risk, industrial risk, risk of transport of hazardous materials and risk of dam failure.
The Risk Prevention Plans (PPR) were established by the Act of 2 February 1995 on strengthening the protection of the environment. The PPR tool is part of the Law of 22 July 1987 on the organisation of civil security, the protection of the forest against fire and the prevention of major risks. The development of a RPP is the responsibility of the State. It is decided by the Prefect.
Whether natural, technological or multi-hazard, risk prevention plans have similarities. They contain three categories of information:
• Regulatory mapping translates into a geographical delimitation of the territory concerned by the risk. This delimitation defines areas in which specific regulations apply. These regulations are easement and impose requirements varying according to the hazard level to which the area is exposed. The areas are represented on a zoning plan that fully covers the study area.
• The hazards at the origin of the risk are contained in hazard documents which may be inserted in the presentation report or annexed to the RPP. These documents are used to map the different intensity levels of each hazard considered in the risk prevention plan.
• The issues identified during the preparation of the RPP can also be annexed to the approved document in the form of maps.
These similarities between the different types of PPR and the desire to achieve a good level of standardisation of PPR data have led COVADIS to opt for a single data standard, sufficiently generic to deal with the different types of risk prevention plan (PPRN natural risk prevention plans, technological risk prevention plans PPRT).
This data standard does not consist of a complete modelling of a risk prevention plan dossier.
The scope of this document is limited to geographical data in the RPPs, whether regulatory or not. Nor is the PPR standard intended to standardise knowledge of hazards.
The challenge is to have a description for a homogeneous storage of the geographical data of the RPPs, since these data are of interest to several professions within the ministries responsible for agriculture, on the one hand, and ecology, and on the other hand, sustainable development.

COVADIS数据标准面向风险预防计划，涵盖了风险预防计划（Risk Prevention Plans，简称RPPs）中所承载地理数据的数字化存储所需的全部技术与组织规范。
该标准覆盖的重大风险涵盖本国领土内可预见的8类主要自然灾害与4类技术灾害：自然灾害包括洪水、地震、火山喷发、地形滑移、海岸灾害、雪崩、森林火灾、气旋与风暴；技术灾害包括核风险、工业风险、危险货物运输风险以及堤坝溃决风险。
风险预防计划（Risk Prevention Plans，简称PPR）系根据1995年2月2日《加强环境保护法案》制定。该工具同时隶属于1987年7月22日《民用安全组织、森林防火及重大风险预防法案》的规制范畴。风险预防计划的编制主体为国家，最终审批决定由省长作出。
无论是自然灾害风险、技术灾害风险还是多灾种复合型风险，各类风险预防计划均具备共通的信息架构，可分为三大类别：
• 监管区划制图：将风险覆盖的地域进行地理界分，明确适用特定监管要求的区域范围。此类监管为限制性监管，并根据区域所面临的灾害等级设定差异化合规要求。上述区域会在全覆盖研究区域的分区规划图中予以标注。
• 灾害源信息：构成风险的灾害相关内容收录于灾害文档中，此类文档可纳入编制汇报报告，或作为风险预防计划的附件。此类文档用于绘制风险预防计划中所考量的各类灾害的不同强度等级分布图。
• 编制问题汇总：在风险预防计划编制过程中识别出的相关问题，也可通过地图形式作为附件附于获批文件之后。
鉴于不同类型PPR之间存在上述共通性，同时为实现PPR数据的标准化水平提升，COVADIS最终选用单一数据标准——该标准具备足够的通用性，可适配各类风险预防计划，包括自然风险预防计划（Natural Risk Prevention Plans，简称PPRN）与技术风险预防计划（Technological Risk Prevention Plans，简称PPRT）。
本数据标准并非对风险预防计划档案的完整建模。
本文件的适用范围仅涵盖风险预防计划中的地理数据，无论其是否具备监管属性。同时，本PPR标准亦不旨在统一灾害相关知识的标准化体系。
当前面临的核心挑战在于，为风险预防计划的地理数据提供统一的存储描述规范——此类数据同时受到农业、生态及可持续发展领域的多个政府部门的关注与使用需求。