Combining Radar Attenuation and Partial Beam Blockage Corrections for Improved Quantitative Application Journal of Hydrometeorology

Partial beam blockage (PBB) correction is an indispensable step in weather radar data quality control and subsequent quantitative applications, such as precipitation estimation, especially in urban and/or complex terrain environments. This paper developed a novel PBB correction procedure based on the improved ZPHI method for attenuation correction and regional specific differential propagation phase (KDP)–reflectivity (ZH) relationship derived from in situ raindrop size distribution (DSD) measurements. The practical performance of this PBB correction technique was evaluated through comparing the spatial continuity of reflectivity measurements, the consistency between radar-measured and DSD-derived KDP and ZH relationships, as well as rainfall estimates based on R(ZH) and R(KDP). The results showed that through incorporating attenuation and PBB corrections (i) the spatial continuity of ZH measurements can effectively be enhanced; (ii) the distribution of radar-measured KDP versus ZH is more consistent with the DSD-derived KDP versus ZH; (iii) the measured ZH from a C-band radar in the PBB-affected area becomes more consistent with collocated S-band measurements, particularly in the rainstorm center area where ZH is larger than 30 dBZ; and (iv) rainfall estimates based on R(ZH) in the PBB-affected area are incrementally improved with better spatial continuity and the performance tends to be more comparable with R(KDP).