Comparing small displacement and large displacement formulations of the cohesive zone elements implemented for strong mode-II interfaces between low modulus bulk materials

Raw data and code for finite element simulations of asymmetric double cantilever beam (ADCB) tests with varying thickness of the top ply presented in section 5.3 on <strong>MIXED-MODE TESTS WITH LOW MODULUS BULK </strong>of Master thesis titled <strong>Finite Element Model For Interfaces In Compatibilized Polymer Blends </strong>(http://resolver.tudelft.nl/uuid:88140513-120d-4a34-b893-b84908fe2373) to compare the influence of mode ratio on the difference between the small displacement and large displacement formulations of the cohesive zone elements

本数据集收录于题为《相容化聚合物共混物界面有限元模型》的硕士论文“低模量体混合模式试验”章节的5.3小节，包含针对表层铺层厚度可变的非对称双悬臂梁（Asymmetric Double Cantilever Beam, ADCB）试验的有限元模拟原始数据与代码，旨在对比模式比对黏聚区单元的小位移列式与大位移列式之间差异的影响。该硕士论文的永久访问链接为：http://resolver.tudelft.nl/uuid:88140513-120d-4a34-b893-b84908fe2373