RV CORYSTES 5B/1995 High Resolution Conductivity-Temperature-Depth (CTD) Data

The data in this archive were collected from CEFAS (Or DFR) research cruises.
They broadly cover the European Shelf with some data from the Iberian Abyssal
Plain. Data were collected using the lowered CTD rosette system which is used
when the vessel is stationary. Usually bottles were fired at particular depths
and samples taken for calibration. In early years only a limited set of
parameters were collected. Notably Pressure (Depth), Temperature and
Conductivity (CTD). From Conductivity Salinity can be calculated using the
UNESCO 1978,1983 formulations . In subsequent years more sensors have been
added, notably fluorometers, Optical back scatter or transmissometers and
Light (PAR, photo synthetically available radiation). The exact configuration
varies between cruises and this is reflected in the data format of the output
files.

Data was collected from research vessels on station, a profile from the
surface to near the sea bed is undertaken. The down cast data should be a
clean profile. Water bottles for sample collection and calibration are fired
on the up cast.

本档案中的数据源自 CEFAS（或 DFR）科研远征。这些数据广泛覆盖了欧洲大陆架，并包含伊比利亚海盆的一些数据。数据采集采用了在船只静止时使用的降低式CTD罗盘系统。通常在特定深度投放瓶体进行采样以供校准。在早期年份，仅收集了有限的参数，主要包括压力（深度）、温度和电导率（CTD）。通过电导率，可利用 UNESCO 1978 和 1983 年的公式计算出盐度。在随后的年份中，增加了更多传感器，尤其是荧光计、光学后向散射或透射计以及光（PAR，光合有效辐射）。具体的配置在不同航次之间有所差异，并在输出文件的数据格式中得到体现。在站点上的科研船舶上采集数据，进行从海面至近海底的剖面调查。下沉数据应呈现为干净的剖面，而上浮时投放的水瓶用于样品采集和校准。