Map visualisation service (WMS) of the dataset: Argonay Natural Hazards Prevention Plan (Haute-Savoie) — approved on 29/01/2009

The COVADIS Data Standard on Risk Prevention Plans includes all technical and organisational specifications for the digital storage of geographical data represented in the Risk Prevention Plans (RPPs). Major risks include the eight foreseeable main natural hazards in the national territory: floods, earthquakes, volcanic eruptions, field movements, coastal hazards, avalanches, forest fires, cyclones and storms, and four technological risks: nuclear risk, industrial risk, risk of transport of hazardous materials and risk of dam failure. The Risk Prevention Plans (RPPs) were established by the Law of 2 February 1995 on the strengthening of environmental protection. The PPR tool is part of the law of 22 July 1987 on the organisation of civil security, the protection of the forest against fire and the prevention of major risks. The development of a PPR falls within the competence of the State. It is decided by the Prefect. Whether natural, technological or multi-hazard, risk prevention plans have similarities. They contain three categories of information: • Regulatory mapping results in a geographical delimitation of the territory concerned by the risk. This delimitation defines areas in which specific regulations apply. These regulations have easement value and impose requirements varying according to the level of hazard to which the area is exposed. The areas are represented on a zoning plan that fully covers the study area. • The hazards causing the risk are included in hazard documents that can be inserted in the submission report or annexed to the RPP. These documents are used to map the different levels of intensity of each hazard considered in the risk prevention plan. • The issues identified during the development of the RPP can also be annexed to the approved document in the form of maps. These similarities between the different types of PPR and the desire to achieve a good level of standardisation of PPR data have led COVADIS to opt for a single data standard, sufficiently generic to address the different types of risk prevention plan (PPRN natural risk prevention plans, PPRT technological risk prevention plans) This data standard does not consist of a complete modeling of a risk prevention plan file. The scope of this document is limited to the geographic data contained in the RPPs, whether regulatory or non-regulatory. The PPR standard is also not intended to standardise the knowledge of hazards. The challenge is to have a description for a homogeneous storage of the geographical data of the PPRs because these data concern several occupations within the ministries responsible for agriculture, on the one hand, and ecology, and sustainable development, on the other. The COVADIS Data Standard on Risk Prevention Plans includes all technical and organisational specifications for the digital storage of geographical data represented in the Risk Prevention Plans (RPPs). Major risks include the eight foreseeable main natural hazards in the national territory: floods, earthquakes, volcanic eruptions, field movements, coastal hazards, avalanches, forest fires, cyclones and storms, and four technological risks: nuclear risk, industrial risk, risk of transport of hazardous materials and risk of dam failure. The Risk Prevention Plans (RPPs) were established by the Law of 2 February 1995 on the strengthening of environmental protection. The PPR tool is part of the law of 22 July 1987 on the organisation of civil security, the protection of the forest against fire and the prevention of major risks. The development of a PPR falls within the competence of the State. It is decided by the Prefect. Whether natural, technological or multi-hazard, risk prevention plans have similarities. They contain three categories of information: • Regulatory mapping results in a geographical delimitation of the territory concerned by the risk. This delimitation defines areas in which specific regulations apply. These regulations have easement value and impose requirements varying according to the level of hazard to which the area is exposed. The areas are represented on a zoning plan that fully covers the study area. • The hazards causing the risk are included in hazard documents that can be inserted in the submission report or annexed to the RPP. These documents are used to map the different levels of intensity of each hazard considered in the risk prevention plan. • The issues identified during the development of the RPP can also be annexed to the approved document in the form of maps. These similarities between the different types of PPR and the desire to achieve a good level of standardisation of PPR data have led COVADIS to opt for a single data standard, sufficiently generic to address the different types of risk prevention plan (PPRN natural risk prevention plans, PPRT technological risk prevention plans) This data standard does not consist of a complete modeling of a risk prevention plan file. The scope of this document is limited to the geographic data contained in the RPPs, whether regulatory or non-regulatory. The PPR standard is also not intended to standardise the knowledge of hazards. The challenge is to have a description for a homogeneous storage of the geographical data of the PPRs because these data concern several occupations within the ministries responsible for agriculture, on the one hand, and ecology, and sustainable development, on the other.COVADIS风险预防计划数据标准（COVADIS Data Standard on Risk Prevention Plans）涵盖风险预防计划（Risk Prevention Plans，RPPs）中所涉及地理数据的数字化存储所需的全部技术与组织规范。本国领土内可预见的主要重大风险包含8类自然灾害：洪水、地震、火山喷发、土体移动、海岸灾害、雪崩、森林火灾、气旋与风暴，以及4类技术风险：核风险、工业风险、危险货物运输风险与堤坝溃决风险。 风险预防计划（RPPs）由1995年2月2日《加强环境保护法》确立。PPR工具属于1987年7月22日《民防组织、森林防火与重大风险预防法》的组成部分。PPR的制定属于国家职权范畴，由省长作出审批决定。 无论自然风险、技术风险还是多风险类型的风险预防计划，均具备共通特征，其包含三类信息： • 监管绘图成果可实现风险所涉领土的地理划定。该划定明确了适用特定监管要求的区域，此类监管规则具备地役权效力，并根据区域面临的风险等级施加差异化义务。上述区域通过全覆盖研究区域的分区规划图进行可视化呈现。 • 引发风险的灾害被纳入灾害文档，此类文档可嵌入提交报告或作为RPP的附件，用于绘制风险预防计划中所考量的各类灾害的不同强度等级分布。 • RPP制定过程中识别出的相关问题，亦可通过地图形式作为附件并入获批文件。 不同类型PPR之间的共通性，以及实现PPR数据标准化的需求，促使COVADIS采用单一数据标准，该标准具备足够通用性，可适配各类风险预防计划：自然风险预防计划PPRN（PPRN natural risk prevention plans）、技术风险预防计划PPRT（PPRT technological risk prevention plans）。 本数据标准并非对风险预防计划文件的完整建模，其适用范围仅局限于RPP中包含的地理数据，无论此类数据是否具备监管属性。此外，PPR标准亦无意对灾害认知进行标准化。该标准的核心目标是为PPR的地理数据提供统一存储描述，因为此类数据分别涉及农业、生态与可持续发展领域的多个部门职责。 COVADIS风险预防计划数据标准（COVADIS Data Standard on Risk Prevention Plans）涵盖风险预防计划（Risk Prevention Plans，RPPs）中所涉及地理数据的数字化存储所需的全部技术与组织规范。本国领土内可预见的主要重大风险包含8类自然灾害：洪水、地震、火山喷发、土体移动、海岸灾害、雪崩、森林火灾、气旋与风暴，以及4类技术风险：核风险、工业风险、危险货物运输风险与堤坝溃决风险。 风险预防计划（RPPs）由1995年2月2日《加强环境保护法》确立。PPR工具属于1987年7月22日《民防组织、森林防火与重大风险预防法》的组成部分。PPR的制定属于国家职权范畴，由省长作出审批决定。 无论自然风险、技术风险还是多风险类型的风险预防计划，均具备共通特征，其包含三类信息： • 监管绘图成果可实现风险所涉领土的地理划定。该划定明确了适用特定监管要求的区域，此类监管规则具备地役权效力，并根据区域面临的风险等级施加差异化义务。 上述区域通过全覆盖研究区域的分区规划图进行可视化呈现。 • 引发风险的灾害被纳入灾害文档，此类文档可嵌入提交报告或作为RPP的附件。 此类文档用于绘制风险预防计划中所考量的各类灾害的不同强度等级分布。 • RPP制定过程中识别出的相关问题，亦可通过地图形式作为附件并入获批文件。 不同类型PPR之间的共通性，以及实现PPR数据标准化的需求，促使COVADIS采用单一数据标准，该标准具备足够通用性，可适配各类风险预防计划：自然风险预防计划PPRN（PPRN natural risk prevention plans）、技术风险预防计划PPRT（PPRT technological risk prevention plans）。 本数据标准并非对风险预防计划文件的完整建模。 其适用范围仅局限于RPP中包含的地理数据，无论此类数据是否具备监管属性。 PPR标准亦无意对灾害认知进行标准化。 该标准的核心目标是为PPR的地理数据提供统一存储描述，因为此类数据分别涉及农业、生态与可持续发展领域的多个部门职责。