Load-bearing capacity

The base file was manufactured by TNO. The base stock is actually a clay and peat map of the province of South Holland. This gives an indication of the settler sensitivity of the soil of Zuid-Holland. Poor soil with more than 4 meters of peat in the top 5 meters of the clay and peat package is extremely sensitive. Poor soil with between 0.5 and 4 meters peat in the top 5 meters of the clay and peat package is very sensitive. Poor soil with less than 0.5 meters peat in the top 5 meters of the clay and peat package is deposit sensitive. Good soil with less than 5 meters contiguous clay and peat within 8 meters below ground level is less sensitive to settling. The set sensitivity of this unit varies greatly, because within this unit there may still be areas that do not meet the bad ground criterion. The file “Sensitivity” has been converted to the file “carrying force”. A column, “carrying force” has been added. In this column it is indicated whether the capacity to pay; ‘good’, ‘bad’ or ‘not optimal’. These maps are part of the bottom vision and are indicative maps. When zooming in on a specific area or question, it is always necessary to check whether further information is available.本基础数据集文件由TNO制作。该基础数据源实为荷兰南荷兰省的黏土与泥炭分布图，可用于评估该区域土壤的沉降敏感性。其中，表层5米内的黏土-泥炭复合层中泥炭厚度超过4米的劣质地层，沉降敏感性极强；泥炭厚度介于0.5至4米的劣质地层，沉降敏感性较强；泥炭厚度不足0.5米的劣质地层，具沉积敏感性。地下8米范围内连续黏土-泥炭层厚度不足5米的优良地层，沉降敏感性较弱。该制图单元的整体沉降敏感性差异显著，因为其内部仍可能存在不符合劣质地层判定标准的区域。原名为"Sensitivity"的文件已被转换为"carrying force"文件，且新增了一列名为"carrying force"的字段。该列将标注地层承载力状况，分为‘优良’‘劣等’或‘非最优’三类。此类分布图属于‘底层视角’相关成果的组成部分，均为参考性图示。当针对特定区域或具体问题进行放大查看时，需始终核实是否可获取更详细的补充信息。