Selected data(s) from : Five-dimensional optical data storage based on ellipse orientation and fluorescence intensity in a silver-sensitized commercial glass

The data selected is based on the figures below, published in the linked article (see the doi). - Figure 1. (a) Femtosecond laser tight focusing in the silver-containing glass, leading to the production of fluorescent silver clusters at its periphery. (b) SLM holographic phase masks with an additional cylindrical profile leading to an elliptical pattern by DLW. (c) Oriented elliptical patterns obtained by SLM phase mask manipulation, corresponding to 24 = 16 orientation-encoded levels. (Only picture) - Figure 2. Fabricated fluorescence calibration matrix. (a) Confocal image of all basic storage units composed by 16 intensity levels and 16 orientation levels. (b) Measured fluorescence intensity versus incident DLW intensity for the 5D decoding process. (Pictures, opj file, csv datas) - Figure 3. (a,b) are the encoded images of two Nobel laureates in 16 orientation levels and 16 intensity levels, respectively. (c) 100 × 100 entangled patterns among 16 × 16 intensity and orientation levels. (d) The fluorescence calibration matrix was fabricated for decoding (fluorescence excitation at 405 nm). (Pictures, cvs datas) ANR_ ARCHIFLUO_ICMCB_Article_Micromachines_Figure3_2020-10-21_V01 : Figure 3 ANR_ ARCHIFLUO_ICMCB_Article_Micromachines_Figure3a_2020-10-21_V01 : Original image oritentation ANR_ ARCHIFLUO_ICMCB_Article_Micromachines_Figure3b_2020-10-21_V01 : Original image intensity ANR_ ARCHIFLUO_ICMCB_Article_Micromachines_Figure3c_Figure3d_2020-10-21_V01 : DLW image ANR_ ARCHIFLUO_ICMCB_Article_Micromachines_Figure3_datas_IICT4BF_2020-10-21_V01 : Intensity image converted to 4 bit format ANR_ ARCHIFLUO_ICMCB_Article_Micromachines_Figure3_datas_OICT4BF_T2020-10-21_V01 : Orientation image converted to 4 bit format ANR_ ARCHIFLUO_ICMCB_Article_Micromachines_Figure3_datas_OICT4BFL_2020-10-21_V01 : Orientation image converted to 4 bit format level - Figure 4. (a,b) Retrieved images from the initial images of Figure 3a,b, respectively. (c,d) Histograms of the level difference between original and decoded levels for the orientation direction and the fluorescence intensity, respectively. (Picture and csv datas) - Figure 5. (a) Confocal top-view image of one single elliptically-shaped storage unit fabricated by using type A DLW. (b) Fluorescence intensity profile along the horizontal and vertical cross section at focal plane. (c) Fluorescence intensity profile and Gaussian fitting along the z-axis (depth). (Picture, opj file, csv datas)