Numerical Fire Spread Simulation Based on Material Pyrolysis - An Application to the CHRISTIFIRE Phase 1 Horizontal Cable Tray Tests - Data Set

This data set is a supplementary resource for the article "Numerical Fire Spread Simulation Based on Material Pyrolysis - An Application to the CHRISTIFIRE Phase 1 Horizontal Cable Tray Tests", submitted to the Fire Safety Journal. It is part of the "Fire Propagation in Cable Tray Installations" project. The provided data is only a summary of the full data produced for the article, due to its size.

The information is structured into multiple *.rar archieves, which mimic the sub-directory structure created for the work. To be able to run the analysis scripts without much tweaking, extract all archieves into the same directory, with each archieve being a sub-directory in it.

The data set is comprised of:

The PROPTI and FDS input files used for the inverse modelling process (IMP) -- the 13* archieves.

Full FDS simulation data of the mirco-combustion calorimeter (MCC) simulations of the best parameter sets per generation of the IMP runs, for jacket and insulator materials.

Full FDS simulation data of the Cone Calorimeter simulations of the best parameter sets per generation of the IMP runs, for all three (25 kW/m², 50 kW/m², 75 kW/m²) incident heat flux conditions.

FDS input files for the MT3 simulations, but full data only for the best parameter sets per IMP run (see below).

Jupyter notebooks used for the analysis of the simulation responses including the scripts and plots generated for, and used in, the paper (RunReports).

A general information directory, containing the FDS input file templates, experimental data used as target and Python scripts containing helper functions.

Videos of a qualitative comparison of the SmokeView animation of the best parameter set in a cable tray simulation against a video from the experiment and an animation of the GAUGE_HEAT_FLUX development for the same simulation over the course of the simulation.

Due to the size of the MT3 simulation data, only the FDS input files for the best parameter sets per generation are uploaded. Complete FDS simulation data is only provieded for the best perameter set of each IMP run, these are :

IMP run, best rep.
--------------------------------
imp_13b, 110751
imp_13c, 121106
imp_13d, 137738
imp_13e, 97493
imp_13f, 91988
imp_13g, 86988
imp_13h, 17480
imp_13b_1, 19033
imp_13b_2, 25043
imp_13b_3b, 24149
imp_13b_4, 29666
imp_13h_1, 10685
imp_13h_2, 10024
imp_13h_3, 10109
imp_13i, 13253

Note: The individual runs of the IMP are named differently as compared to the labeling used in the paper, as described below:

IMP run, label in paper
--------------------------------

imp_13b, Tb
imp_13c, Ta
imp_13d, Tc
imp_13e, Ta,b,c
imp_13f, Tb,c
imp_13g, Ta,c
imp_13h, Ta,b,cLA,L1,HC
imp_13b_1, TbL1
imp_13b_2, TbPL1
imp_13b_3b, TbPL1L1
imp_13b_4, TbPL2,HT
imp_13h_1, Ta,b,cPA,L1,HCL1
imp_13h_2, Ta,b,cPA,L1,HCL2
imp_13h_3, Ta,b,cPA,L1,HCL3
imp_13i, TbPA,L1,HC