WVV/STW/MFN: Energy data consumption

Aggregated energy related data. GENERAL INFORMATION Mainfranken Netze GmbH (MFN) and Stadtwerke Würzburg AG (STW) provide aggregated energy consumption and energy production data free of charge by uploading it as regularly as possible to the city's OpenDataPortal, as the greatest possible data transparency is in the general interest to achieve the climate goals. The data come from the network area of the respective grantor of the MFN and the following sectors: Household, commercial, industrial, agricultural, heating electricity, street lighting – municipal data are, as far as possible, issued separately. Municipal data are energy data in which the consumer, operator and/or producer is a municipality. Data on generation are provided according to forms of energy. The following forms of energy - photovoltaic systems on buildings, ground-mounted photovoltaic systems, CHP systems, hydropower - from the following wired media - natural gas, district heating, electricity - are taken into account. This type of data must be published and can also be found in the Market Master Data Register. STW and MFN only transmit aggregated data. Aggregated data are available when at least three consumers/producers are identified per total value. This does not include municipal data. DISCLAIMER OF LIABILITY MFN and STW assume no liability for the accuracy, completeness and availability of the transmitted data. The format of the data may change if the MFN or STW appears to be in a different form. PURPOSE The data should be freely usable by everyone for the purpose of achieving the climate targets. It is not the purpose of this data provision that conclusions can be drawn about individual persons, e.g. by possible aggregation / evaluation / enrichment with other data. DECLARATION OF DATA Sectors have been defined on the basis of contractual partners.Example district heating: Although most district heating in the city centre is used by private individuals for domestic heating and hot water, no district heating is indicated in the table under "Household". The reason for this is that all district heating connections run on commercial homeowners - these are also housing cooperatives, churches, etc., where the private individuals are tenants. description Possible values Settlement year Year of reckoning. As a result, hardly any forecast values will be used. Due to the statutory rolling billing (under the year), the stated energy values are not the consumption in the calendar year. place Concession area in whose network the consumption or the feed-in takes place. (In the case of open-air installations within the boundary, the installation may be physically located in an area but feed into the neighbouring network.) Division Wired media are assigned to a division. Gas, electricity, district heating (including local heating) sector Sectors defined by the Integrated Energy and Climate Concept. The assignment was based on profile types. The profile types are assigned according to the load profile and not according to customer group - therefore these may differ. commerce, household (generally private households), industry, agriculture, street lighting (unless mittles Contracting) Municipal Used to identify municipal customers separately. Local, not local number Number of acceptance points / number of generation plants of the corresponding group. Empty, if less than minimum. Quantity of energy Energy (quantity) in kWh. remark remark OK, not specified (if too few per aggregation) Type of energy Assignment of the type of production to a category. Wind (land), Cogeneration, Photovoltaics (open space), Photovoltaics (buildings), Water conversion Energy quantity of the plant in kWh installed capacity Installed power of the system in kW. Self-consumption Plants have a self-consumption in kWh. Net levy Amount of energy fed into the grid in kWh. (Conversion less self-consumption)聚合性能源相关数据 通用信息 美因弗兰肯电网有限公司（Mainfranken Netze GmbH，MFN）与维尔茨堡城市公用事业股份公司（Stadtwerke Würzburg AG，STW）无偿提供聚合性能源消费与生产数据，将尽可能定期上传至该市开放数据门户（OpenDataPortal），因最大程度的数据透明度符合实现气候目标的公共利益。 数据来源于MFN所辖的电网区域以及以下领域：住宅、商业、工业、农业、供暖用电、道路照明——市政数据将尽可能单独发布。市政数据指消费者、运营方及/或生产方为市政主体的能源数据。 发电数据按能源形式分类提供，涵盖以下能源形式：建筑屋面光伏系统、地面光伏系统、热电联产（CHP）系统、水力发电，以及以下有线介质：天然气、区域供热、电力。此类数据必须公开，亦可在市场主数据登记册（Market Master Data Register）中查询获取。 STW与MFN仅传输聚合数据：聚合数据指每个总数值对应至少三个消费者/生产者的情况，但市政数据除外。 免责声明 MFN与STW不对所传输数据的准确性、完整性及可用性承担任何责任。 若MFN或STW调整数据呈现形式，数据格式亦可能随之变更。 数据用途 本数据面向所有群体免费开放使用，旨在助力气候目标的实现。本数据提供的初衷并非允许通过聚合、评估或结合其他数据等方式推断个体信息。 数据说明 行业分类基于合同伙伴关系划定。示例：区域供热——尽管市中心多数区域供热服务由私人用户用于住宅供暖与热水供应，但表格中"住宅"分类下并未标注区域供热数据。原因在于所有区域供热接入均对接商业房主主体——此类主体亦包括住房合作社、教会等，私人用户仅为该类主体的租户。 字段说明 可选取值 结算年度（Settlement year） 核算年度，因此几乎不会使用预测值。根据法定滚动结算规则（按年度滚动），所列能源数值并非日历年度内的实际消费量。 供电区域（place） 指消费或电力馈入所依托的特许经营电网覆盖区域。（若露天设施位于边界范围内，其物理位置可能处于某一区域，但实际馈入相邻电网。） 介质分类（Division） 将有线介质划分为以下类别：天然气、电力、区域供热（含局部供热） 可选取值：天然气、电力、区域供热（含局部供热） 行业分类（sector） 依据《综合能源与气候规划》划定分类标准，分类基于负荷曲线类型而非客户群体，因此分类结果或存在差异。 可选取值：商业、住宅（一般指私人家庭）、工业、农业、道路照明（除非通过合同另行约定） 市政标识（Municipal） 用于单独识别市政客户。 可选取值：本地（市政）、非本地（非市政） 接入点/发电设施数量（number） 对应分组的接入点数量或发电设施数量。 若数量低于最低阈值则留空。 能源总量（Quantity of energy） 能源数量，单位为千瓦时（kWh）。 备注（remark） 可选取值：正常、未指定（若聚合分组内数据量过少） 能源类型（Type of energy） 将生产类型划分为以下类别：陆地风电、热电联产、地面光伏、建筑屋面光伏、水力发电 可选取值：陆地风电、热电联产、地面光伏、建筑屋面光伏、水力发电 能源转换量（conversion） 设施的能源转换量，单位为千瓦时（kWh）。 装机容量（installed capacity） 系统的装机功率，单位为千瓦（kW）。 自发自用电量（Self-consumption） 设施的自发自用电量，单位为千瓦时（kWh）。 电网馈入净电量（Net levy） 馈入电网的能源总量，单位为千瓦时（kWh），计算公式为：转换能源量减去自发自用电量。