five

Boundary Layer Meteorology measurements collected from ice stations during the SIPEX II voyage of the Aurora Australis, 2012

收藏
Research Data Australia2025-12-20 收录
下载链接:
https://researchdata.edu.au/boundary-layer-meteorology-australis-2012/3919335
下载链接
链接失效反馈
官方服务:
资源简介:
Note - these data should be used with caution. The chief investigator for the dataset has indicated that a better quality dataset exists, but the AADC have been unable to attain it for archive.Matlab files containing raw data collected using the program "HC2S3snowwind.CR1" running on Campbell Scientific CR1000 dataloggers. Datalogger "C" was used during all ice stations. On the 8th of October a second mast and logger ("A") were installed on what became the final day of Ice Station 4, and both loggers were deployed at stations 6 and 7, with "C" containing the longer records for each station as it was always installed first and (conditions permitting) left out longer. The sensors on these masts consist of:RM Young "Wind Sentry" Vane and Anemometer set (on top of each mast), no serial numbersRotronics HC2S3 temperature and relative humidity sensors with standard polyethylene filters Upper sensor, mast "C": s/n 60837541Lower sensor, mast "C": s/n 60837536Upper sensor, mast "A": s/n 60837468Lower sensor, mast "A": s/n 60834204RM Young "Wind Sentry" anemometers (without vane) at 3 additional elevations on each mastWenglor YHO3NCT8 photoelectric sensors at 4 heights on each mast. The upper sensor and the third sensor from the top were oriented facing up, while the others faced down. The upper three sensors were purchased in 2012, from a batch of these sensors manufactured in a new Eastern European factory while the lowest sensor on each mast came from a lot purchased in 2007, manufactured in Wenglor's German factory and extensively tested for use in snow.Data contained in these .mat files includes the following variables, with units:Textdates: CSI formatted dates, UTC except for station 2, which was (accidentally) UTC+12Datenm: Matlab "datenumber", all UTC except for station 2, which is also UTC+12 hours.Battvolt: battery voltageWptemp: temperature of the Wiring Panel thermister, degrees CTemp 1: air temperature above approximately 50cm, ventilated HC2S3 rotronics sensor, degrees CRH1: relative humidity (WRT water) above approximately 50cm, ventilated HC2S3 rotronics sensor, %Temp 2: air temperature above approximately 200cm, ventilated HC2S3 rotronics sensor, degrees CRH2: relative humidity (WRT water) above 197cm, ventilated HC2S3 rotronics sensor, %Snow1: snow particles per 10second interval at approximately 10cmSnow2: snow particles per 10second interval at approximately 50cmSnow3: snow particles per 10second interval at approximately 100cmSnow4: snow particles per 10second interval at approximately 200cmWind1: average speed (m/s) at approximately 250cm during 10s interval Wind1max: maximum speed at approximately 250cm during 10s intervalWind2: average speed (m/s) at approximately 100cm during 10s intervalWind2max: maximum speed at approximately 100cm during 10s intervalWind3: average speed (m/s) at approximately 120cm during 10s intervalWind3max: maximum speed at approximately 120cm during 10s intervalWind4: average speed (m/s) at approximately 50cm during 10s intervalWind4max: maximum speed at approximately 50cm during 10s intervalWindDir: wind direction at approximately 250cm, degrees, relative to mast orientation (needs correction to true)Measurement heights varied by ice station and by mast being used.
提供机构:
Australian Ocean Data Network
二维码
社区交流群
二维码
科研交流群
商业服务