Point clouds of Constructie bridge on Westlandseweg, Delft, The Netherlands

Point clouds of Constructie bridge on Westlandseweg in Delft was acquired for the project “Laser Scanning for Automatic Bridge Assessment” or called “BridgeScan” funded through H2020 Marie Curie IF and for a big assignment of a course “3D Surveying of Civil and Offshore Infrastructure” of a Master program at TU Delft Dept. Geoscience and Remote sensing”. The Constructie bridge is a concrete bridge with mix-vehicle and tram bridge with one span over a channel. The data points of the bridge were acquired using Leica ScanStation P40, from 9 stations (5 below, 2 on a top and 1 each side) with the sampling step 6.3mm at the measure range of 10.0m. The point clouds from different scanning stations were registered using the artificial targets through Leica Cylone software. The point cloud of the bridge was used to reconstruct a 3D model and identify surface damage. The data set was down-sampled with the sampling step of 5mm.