3D-printed chitosan-based scaffolds with Scutellariae baicalensis extract for dental applications

Uniform_of_fibers.xlsx - the columns indicate the next measurement, while the rows represent printouts containing different extract concentrations. Data are presented in mm. Data were examined using a microscope (ZEISS SteREO Discovery.V20 Motorized Stereo Microscope, Jena, Germany) and ImageJ.Pore_factor.xlsx - columns indicate the area of ​​the next three holes in the frame, rows represent printouts containing different extract concentrations. Data are presented in mm2. Data were examined using a microscope (ZEISS SteREO Discovery.V20 Motorized Stereo Microscope, Jena, Germany) and ImageJ.Viscosity.xlsx - the data represent the viscosity of the mixtures. The columns indicate the viscosity as a function of extract concentration, while the rows indicate the different shear rates. Data are presented in cps. The viscosity values were evaluated at shear rate from 5 to 20 1/s using a LV-3 spindle Brookfield DV2T viscometer at 25 °C, assessed using Rheocalc T software.Dissolution.xlsx - data represent the percentage of baicalin released. Columns indicate the systems tested, rows the corresponding time points. Data are presented as a percentage. Tests were performed using the Agilent 708-DS dissolving equipment (Agilent Technologies; Santa Clara, CA, USA). A typical basket method was used, with 50 rpm and stirring at 37 ± 0.5 °C.