Combinatorial and machine learning approaches for the analysis of Cu2ZnGeSe4: influence of the off-stoichiometry on defect formation and solar cell performance

Dataset of the results published in the J. Mater. Chem. A, 2021, 9, 10466. The files represent: i) the measured compositional and optoelectronic data of each solar cell, as well as the data generated from the Raman spectra analysis; ii) Raman spectra of the representative cells; iii) Machine Learning discriminants.

The elemental composition of the different cells of the combinatorial sample was determined by X-ray fluorescence (XRF) using a Fischerscope XDV system with a 1 mm spot diameter, a 50 kV acceleration voltage, a Ni10 lter and a 45 s acquisition time. Raman analysis with blue (442 nm) and green (532 nm) excitation wavelengths were performed on the bare absorber, while measurements with NIR (785 nm) were performed in complete devices using Horiba Jobin Yvon FHR640 and iHR320 monochromators coupled with CCD detectors. The first monochromator is optimized for the UV and visible spectral ranges and was used with 442 nm (He–Cd gas laser) and 532 nm (solid state laser) excitation wavelengths. The second monochromator is optimized for the NIR range and was used with a 785 nm (solid state laser) excitation wavelength. The power density of the lasers was kept below 150 W cm2 and the spot size was ~70 \(\mu\)m. The measurements were performed in a backscattering configuration through a specific probe designed at IREC. The J–V characteristics of the devices were obtained under simulated AM1.5 illumination (1000 W m2 intensity at room temperature) using a pre-calibrated Class AAA solar simulator (Abet Technologies Sun 3000).