Data belonging to the publication: Closed-loop model-predictive wind farm flow control under time-varying inflow using FLORIDyn

Collection of plotting scripts and data required to recreate the results plots in the publication.<br><strong>Plotting</strong>The main plotting script is called <em>Evaluate_long_cases.m </em>and calls the remaining functions.Open this file and step through it to generate various plots used and not used in the paper.Note that some scripts rely on user-defined inputs, e.g., the turbine index.<br><strong>Data</strong>The plotting relies on the unaltered data in the folder "HKN_12_to_15h_data", which is a compressed file.The data of the disturbed cases also contains the wind direction measurements of the past 1-min averaged probes, as well as the then corrected data from the Ensemble Kalman Filter. There is further a small selection of cases not used in the publication, like a preview-enabled version of the shifted approach.Disclaimer: Through a settings mistake, the data of the<em> CLC, 500s ph, noise-free</em> controller is 1 s too short. The script gives a warning and extrapolates with a constant last value.<br><strong>FLORIDyn Settings</strong>The closed-loop cases have a folder in the data called "Settings", which defines the closed-loop settings for the controller, EnKF, FLORIDyn, and FLORIS. This is needed to employ the same controller as used in the presented simulations. More details about running FLORIDyn simulations (stand-alone and in closed-loop) can be found with the Matlab software, see doi 10.4121/038777f7-f497-494f-9f61-85d90a00074a<br><strong>Look-up Table</strong>The LuT is given with as "HKN_LuT_orientation.csv", and is plotted at the end of the <em>Evaluate_long_cases.m</em> script.The case data also contains a 2-deg case run with a LuT generated by NREL's FLORIS: "off_db2deg_ki0-01"