浸渍纸层压实木复合地板静曲强度检测数据

浸渍纸层压实木复合地板静曲强度多少是产品是否达标的一项重要且强制性标准，静曲强度关系到地板产品的耐磨性、不易断裂性能等，静曲强度越高，代表产品的品质越好，本数据对浸渍纸层压实木复合地板静曲强度作出检测，为企业把控好质量关卡，及时改进生产工艺，为企业生产及消费者选择提供参考。1、产品检测：对浸渍纸层压实木复合地板进行抽样检测，每次检测样本温度保持在18~22℃，相对湿度60~70%，样本选取两点200mm左右作为两支座点测量距离并记录，测量样本宽度和厚度并记录，检测出样本破坏时最大荷载并记录；2、数据处理：静曲强度=3*破坏时最大荷载*两支座间距离/（2*样本宽度*样本厚度的平方）；3、根据国家标准，判断浸渍纸层压实木复合地板静曲强度是否达标，若样本中静曲强度≥30.0MPa，则认为该样本合格，否则为不合格；4、对平面实木复合地板静曲强度的检验检测，为企业生产标准化生产做出有效参考。

The modulus of rupture (MOR) of impregnated paper laminated solid wood composite flooring is a critical and mandatory standard for evaluating product quality compliance. MOR directly correlates with the abrasion resistance and fracture resistance of flooring products, with higher MOR values indicating better product quality. This dataset conducts tests on the MOR of impregnated paper laminated solid wood composite flooring to help enterprises strictly control product quality, timely optimize production processes, and provide references for enterprise production management and consumer product selection.

1. Product Testing: Perform sampling tests on impregnated paper laminated solid wood composite flooring. The test environment temperature shall be maintained at 18–22°C with a relative humidity of 60–70%. Two supporting points approximately 200 mm apart are selected, and the distance between them is recorded. The width and thickness of each test sample are measured and documented, and the maximum load at the moment of sample failure is detected and recorded.
2. Data Processing: The MOR is calculated using the formula: MOR = 3 × Maximum load at failure × Distance between supporting points / (2 × Sample width × (Sample thickness)²).
3. Compliance Judgment: According to national standards, the compliance of each test sample is judged based on its MOR value. A sample is considered qualified if its MOR is ≥ 30.0 MPa; otherwise, it is deemed unqualified.
4. The test and inspection of the modulus of rupture for flat solid wood composite flooring provide effective references for enterprises to carry out standardized production.

搜集汇总

数据集介绍

特点

该数据集包含141条浸渍纸层压实木复合地板的静曲强度检测数据，用于评估地板产品的质量，确保其符合国家标准（静曲强度≥30.0MPa）。数据涵盖多个检测参数，如温度、湿度、荷载等，为企业生产和消费者选择提供参考。