Supplementary data for the conference paper: On the effect of release agent and heating time on tool-ply friction of thermoplastic composite in melt

The dataset contains supplementary data for the ESAFORM 2022 conference paper entitled: 'On the effect of release agent and heating time on tool-ply friction of thermoplastic composite in melt'. The dataset consists of inter-ply friction tests on UD C/PEKK in melt using a friction tester located at the University of Twente to simulate the response during actual hot press forming of thermoplastic matrix composites. Several conditions (different sliding velocities, temperatures, and normal pressures) are measured with and without release agent applied in an effort to investigate the effect on the transient tool-ply friction response. Furthermore, the effect of the heating time on the subsequent tool-ply friction is measured, for which also ply-ply friction experiments are conducted. The experimental procedure is described and an overview of the used specimens with their test conditions is provided. Matlab scripts are included to replot the figures as shown in the mentioned conference paper.

本数据集为ESAFORM 2022会议论文《关于脱模剂与加热时间对熔融态热塑性复合材料铺层-模具摩擦行为的影响》提供补充数据。本数据集涵盖在特温特大学（University of Twente）使用摩擦试验机开展的熔融态单向碳纤维/聚醚酮酮（UD C/PEKK）铺层间摩擦试验，用于模拟热塑性基复合材料实际热压成型过程中的摩擦响应。试验设置了有无脱模剂的多组工况，涵盖不同滑动速度、温度与法向压力，以探究其对瞬态铺层-模具摩擦响应的影响。此外，本数据集还测量了加热时长对后续铺层-模具摩擦行为的影响，并同步开展了铺层间摩擦试验。本数据集对试验流程进行了详细说明，并给出了所用试样及对应试验工况的汇总信息。同时附带Matlab脚本，可复现上述会议论文中的相关图表。