Power Coefficient for VAWT wind turbine with different deflectors

DataTrain: contains a set of 300 training samples, as described below.
DataVal: contains a set of 50 validation samples, as described below.

INPUT
Parameters that describe the geometry of a deflector, as it is depicted in the file "Parametrization.pdf". Distances are in centimeters and angles in sexagesimal degrees.
The values for the variables were obtained by the Latin Hypercube Sampling technique.

OUTPUT
Cp: Power Coefficient obtained by CFD simulations using the opensource software Code_Saturne.

Cp=P/(rho*R*h*U^3),
where P is the power generated by the turbine, rho is the air density,R and h are the radius and height of the turbine respectively and U is the velocity ofthe incoming wind.

DataTrain：包含一组300个训练样本，具体描述如下。
DataVal：包含一组50个验证样本，具体描述如下。
输入参数：描述了偏转器几何形状的参数，如文件“Parametrization.pdf”中所示。距离单位为厘米，角度单位为六十进制的度数。
变量的值是通过拉丁超立方抽样技术获得的。
输出：
Cp：通过开源软件Code_Saturne进行CFD模拟得到的功率系数。
Cp=P/(rho*R*h*U^3)，其中P是涡轮机产生的功率，rho是空气密度，R和h分别是涡轮机的半径和高度，U是 incoming wind的速度。