CRAWDAD cmu/zigbee-eda

Captured Zigbee packets during energy depletion attack experiments. DOI: 10.15783/t8mt-a674 (https://doi.org/10.15783/t8mt-a674)This Carnegie Mellon University dataset contains Zigbee packets that were captured during energy-depletion attack experiments. More specifically, the contributors used Zigator to deploy two stand-alone WIDS sensors and capture Zigbee packets, while HiveGuard was used to archive the pcap files that were generated by the WIDS sensors. Each WIDS sensor corresponded to a Raspberry Pi 3 Model B+ that was equipped with an ATUSB in monitor mode. Four experiments were conducted to test four commercial Zigbee devices, each powered by a brand new CR2450 lithium battery, against an energy depletion attack that was launched by an ATUSB with modified firmware. This research was supported in part by the CyLab Security and Privacy Institute. More details about the setup of each experiment, as well as the keys that were used to encrypt and authenticate the captured Zigbee packets, can be found in the dataset.institution :cmuversion :2021-10-22Tracesetspring2021files: sth3-z2motion.zip, sth3-z2multi.zip, sth3-z3button.zip, sth3-z3multi.zipdescription: Set of Zigbee packets that were captured during the Spring 2021 semester.tech description: Captured Zigbee packets during four experiments that tested an energy depletion attack against four commercial Zigbee devices, where each of them was powered by a brand new CR2450 lithium battery. The Zigbee packets were captured by two WIDS sensors and archived by HiveGuard, while the energy depletion attack was launched by an ATUSB with modified firmware. This research was supported in part by the CyLab Security and Privacy Institute.collection method: see individual traces below.dataname: spring2021version: 2021-10-22date/time of measurement start: 2021-04-29date/time of measurement end: 2021-05-02spring2021 Tracessth3-z2motion.zip: Set of Zigbee packets that were captured by two WIDS sensors and archived by HiveGuard during the experiment where a SmartThings Hub (IM6001-V3P01) and a legacy Zigbee motion sensor were used.description: The sth3-z2motion.zip file contains two folders, named rpi01 and rpi02, and the sth3-z2motion.txt file. Each folder contains the pcap files that HiveGuard archived from the corresponding WIDS sensor during the sth3-z2motion experiment, while the sth3-z2motion.txt file contains additional information about the experimental setup and the keys that were used to encrypt and authenticate the captured Zigbee packets.last modified: 2021-10-22dataname: sth3-z2motion.zipurl: /download/cmu/zigbee-eda/2021-10-22/spring2021/sth3-z2motion.zipsth3-z2multi.zip: Set of Zigbee packets that were captured by two WIDS sensors and archived by HiveGuard during the experiment where a SmartThings Hub (IM6001-V3P01) and a legacy Zigbee multipurpose sensor were used.description: The sth3-z2multi.zip file contains two folders, named rpi01 and rpi02, and the sth3-z2multi.txt file. Each folder contains the pcap files that HiveGuard archived from the corresponding WIDS sensor during the sth3-z2multi experiment, while the sth3-z2multi.txt file contains additional information about the experimental setup and the keys that were used to encrypt and authenticate the captured Zigbee packets.last modified: 2021-10-22dataname: sth3-z2multi.zipurl: /download/cmu/zigbee-eda/2021-10-22/spring2021/sth3-z2multi.zipsth3-z3button.zip: Set of Zigbee packets that were captured by two WIDS sensors and archived by HiveGuard during the experiment where a SmartThings Hub (IM6001-V3P01) and a Zigbee 3.0 button were used.description: The sth3-z3button.zip file contains two folders, named rpi01 and rpi02, and the sth3-z3button.txt file. Each folder contains the pcap files that HiveGuard archived from the corresponding WIDS sensor during the sth3-z3button experiment, while the sth3-z3button.txt file contains additional information about the experimental setup and the keys that were used to encrypt and authenticate the captured Zigbee packets.last modified: 2021-10-22dataname: sth3-z3button.zipurl: /download/cmu/zigbee-eda/2021-10-22/spring2021/sth3-z3button.zipsth3-z3multi.zip: Set of Zigbee packets that were captured by two WIDS sensors and archived by HiveGuard during the experiment where a SmartThings Hub (IM6001-V3P01) and a Zigbee 3.0 multipurpose sensor were used.description: The sth3-z3multi.zip file contains two folders, named rpi01 and rpi02, and the sth3-z3multi.txt file. Each folder contains the pcap files that HiveGuard archived from the corresponding WIDS sensor during the sth3-z3multi experiment, while the sth3-z3multi.txt file contains additional information about the experimental setup and the keys that were used to encrypt and authenticate the captured Zigbee packets.last modified: 2021-10-22dataname: sth3-z3multi.zipurl: /download/cmu/zigbee-eda/2021-10-22/spring2021/sth3-z3multi.zip