Nanowire-based smart windows combining electro- and thermochromic for dynamic regulation of solar radiation

1.The data contains every figure in the manuscript and every figure in the supporting information. 2.Transmission electron microscope (TEM) images were acquired using a Hitachi H-7700 transmission electron microscope operated at an accelerating voltage of 100 kV. Scanning electron microscopy (SEM) images were acquired by a field emission scanning electron microanalyzer (Zeiss Supra 40 scanning electron microscope at an acceleration voltage of 5 kV). The X-ray diffraction patterns (XRD) were measured on a Philips X’ Pert Pro Super X-ray diffractometer equipped with graphite-monochromatized Cu KR radiation. The differential scanning calorimetry curves were recorded on DSC Q2000 (TA Instruments). UV-VIS-NIR spectra were recorded on SolidSpec-3700 (Shimadzu Corporation) in transmittance mode with an integrating sphere at room temperature and equipped with TS120 heating & cooling stage (Wuhan Congtical Technology Corporation). The haze spectra were measured by a CS-700 Haze Meter (Hangzhou CHNSpec Technology) with a wavelength range of 400–760 nm. ICP-AES data were obtained by an Optima 7300 DV instrument (PerkinElmer Corporation). The sheet resistance of the film was tested by M-3 portable four-point probe test meter (Suzhou lattice electron Limited company). The mechanical stability of the devices was tested by a mechanical system (Instron 5565A). All the electrochemical measurements were carried out using a three-electrode configuration with a Pt wire as the counter electrode and Ag/AgCl as the reference electrode on a CHI760D electrochemistry workstation without separate instructions. The time-dependent infrared images were recorded by Thermal imager VarioCAM hr head 680 (InfraTec GmbH). 3.The model chamber was built using recycled carton external structure brackets and wrapped with aluminum foil for thermal insulation on the outside the dimensions of the model chamber are 15 × 10 × 10 cm3. 4.The software of EnergyPlus was used to evaluate the energy consumption with different windows in different climate zones.