LTE-P-5 PEM Thermal Stability

Name: LTE-P-5 PEM Thermal Stability
Creator: National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nel Hydrogen
Published: 2023-06-07T02:43:38+08:00

DataCite Commons2023-06-07 更新2025-04-09 收录

离子交换膜性能测试

燃料电池材料

数据链接：

https://www.osti.gov/servlets/purl/1983668/数据链接链接失效反馈

官方服务：

资源简介：

A procedure for measuring the ion exchange capacity (IEC) of a proton exchange membrane (PEM).

提供机构：

National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nel Hydrogen

创建时间：

2023-06-07

Structural characterization of a customised anion exchange membrane for fuel cell via neutron reflectivity

阴离子交换膜

燃料电池材料

Over the past decades, fuel cell (FC) research has grown exponentially with the continued development of new materials and systems for automotive and stationary applications. FCs are typically divided

DataCite Commons2020-09-17 更新60

Chemical Descriptors of Yttria-Stabilized Zirconia at Low Defect Concentration: An ab Initio Study

燃料电池材料

结构缺陷检测

Yttria-stabilized zirconia (YSZ) is an important oxide ion conductor with applications in solid oxide fuel cells (SOFCs) and oxygen sensing devices. Doping the cubic phase of zirconia (c-ZrO2) with yt

NIAID Data Ecosystem50

SEM images of symmetrical cell interface with Sr0.95Ti0.30Fe0.70O3-d electrodes and CGO-20 substrate sintered at 800 °C, 900 °C and 1000 °C

燃料电池材料

电极材料微观结构

This dataset contains images of polished cross section of symmetrical cell interface with Sr0.95Ti0.30Fe0.70O3-d electrodes and CGO-20 substrate sintered at three different temperatures 800 °C, 900

Most Wiedzy Open Research Data Catalog30

Nano Zirconia for Solid Fuel Cells Market

燃料电池材料

氧化锆市场

Global Nano Zirconia for Solid Fuel Cells Market Report 2023 comes with the extensive industry analysis of development components, patterns, flows and sizes. The report also calculates present and pas

IMR REPORTS50

EIS measurements for the PrOx oxygen electrode as a function of annealing temperature

电化学阻抗谱

燃料电池材料

Symmetric measurements of a half-cell with a 200 nm thick praseodymium oxide layer for different annealing temperatures (400 - 900°C). Measurements were taken with an excitation amplitude of 25 mV acr

DataCite Commons2026-03-26 更新40

LTE-P-5 PEM Thermal Stability

资源简介：

相关数据集