1.88kW BLDC Sensorless FOC - Sliding Mode vs Flux Observer

This dataset is in support of my planned research paper shortly to be submitted to "IEEE Transactions on Power Electronics".In this paper and dataset, speed and the position estimation of BLDC is done using the sensorless vector control method i.e., Field Oriented control (FOC) and observer. The implementation method is the known method of vector control, so any textbook can be referred, with the addition of SMO or flux observer which acts as the "Adaptive Controller" in the estimation of speed. The switching pattern of the 3-phase inverter is implemented using space vector modulation.DIfferences in this paper dataset can be seen as the author has includedperformance comparison using Sliding Mode Observer (SMO) and flux observer isPWMCOmpensCLosed loopAll this is implemented on 32-bit Real-Time microcontroller. The pins usage not mentioned here are used for other General-Purpose-CAN,USB, RS485 etc.PFC is not included in this simulation as it is assumed that PF = 1.There is related dataset "100W BLDC Sensorless FOC - Sliding Mode vs Flux Observer" ,DOI: https://dx.doi.org/10.21227/8rz1-p666These BLDC motors and controllers are used in many industries including medical e.g. in Positive Airway Pressure respirators,ventilator. There are many research papers, some papers are contradictory with one another, so this study comes in handy to decide.The author has also 1 different complex model, built by him(but has some errors,workingon it also) and that will be uploaded later.