CRAWDAD tools/collect/802.11/wrapi_plus

A tool for monitoring wireless statistics in real-time.WRAPI+ is a tool to monitor wireless statistics, including received signal strength, transmitted frame count, and failed frame transmissions and acknowledgments on a Windows XP end hosts' IEEE 802.11b/g network device. WRAPI+ was built upon the freely available WRAPI C++ library.Lastmodified :2006-11-09Dataname :tools/collect/802.11/wrapi_plusFile :wrapi_plus.tar.gzReleasedate :2005-05-10Change :NAME CHANGED to tools/collect/802.11/wrapi_plus. Also see 'old name' field.Alias :wpi/perform/tool/wrapi_plusNewname :tools/collect/802.11/wrapi_plusReferences :li-toolsWebsite :http://perform.wpi.edu/tools/Keyword :802.11 RFMON signal strengthOutput :MAC Layer Statistics (e.g., RSSI, TransmittedFragmentCout, RetryCount, etc)Parameters :Output file nameUsage :1)Before you run wrapi.exe, you need to stop "Wireless Zero Configuration Service". by typing these two command at the command prompt "net start ndisuio" and "net stop WZCSVC" 2) wrapi.exe [filename] It will generated two logfiles: [filename]_log.dat: the Mac Layer Statistics Data. [filename]_en.dat : Key the AP's Information. If there exist multiple APs. It will recorder all the AP's Mac address. However, sometime it would log a fake AP'MAC. If no parameter is given, it will generate logfile names use the current date for you such as "20041025153112.dat" and put it in the same directory.Algorithm :WRAPI+ is an application built upon the freely available C++ library named WRAPI10 that provides function calls to gather wireless statistics in Windows XP. When run on an end-host, WRAPI+ periodically (every 500 ms, by default) reports and logs IEEE 802.11 network interface statistics that includes received signal strength, transmitted frame count, and failed frame transmissions and acknowledgments. WRAPI+ is provided with source code to maximize reuse and enable measurement customization.Limitation :1) Only works with some chipsets, For example: Net Gear WG511g v1 card. Lucent ORiNOCO wireless cards, Cisco Aironet cards (340 and 4800 series), Compaq and Dell in-built wireless cards, (Dell could not get Fail Count) Linksys cards. (not sure)

一款实时监控无线统计数据的工具。WRAPI+是一款用于监控无线统计数据的应用程序，包括接收信号强度、传输帧数以及Windows XP端主机IEEE 802.11b/g网络设备上的失败帧传输和确认。WRAPI+构建于免费提供的WRAPI C++库之上。最后修改日期：2006年11月9日。数据名称：tools/collect/802.11/wrapi_plus，文件：wrapi_plus.tar.gz，发布日期：2005年5月10日。变更：名称已更改为tools/collect/802.11/wrapi_plus。另请参阅'旧名称'字段。别名：wpi/perform/tool/wrapi_plus，新名称：tools/collect/802.11/wrapi_plus，参考资料：li-tools，网站：http://perform.wpi.edu/tools/，关键词：802.11 RFMON信号强度，输出：MAC层统计信息（例如，RSSI、传输帧数、重试计数等），参数：输出文件名，使用方法：1）在运行wrapi.exe之前，您需要停止“无线零配置服务”，通过在命令提示符中输入以下两个命令实现：“net start ndisuio”和“net stop WZCSVC”。2）wrapi.exe [文件名]，它将生成两个日志文件：[文件名]_log.dat：MAC层统计数据。[文件名]_en.dat：记录接入点（AP）的信息。如果存在多个AP，它将记录所有AP的MAC地址。然而，有时它会记录一个虚假的AP MAC。如果没有提供参数，它将使用当前日期生成日志文件名，例如“20041025153112.dat”，并将其放置在相同目录下。算法：WRAPI+是一款基于免费C++库WRAPI10的应用程序，该库提供了用于在Windows XP中收集无线统计数据的功能调用。当在端主机上运行时，WRAPI+默认每500毫秒定期报告和记录IEEE 802.11网络接口统计信息，包括接收信号强度、传输帧数和失败的帧传输及确认。WRAPI+提供了源代码，以最大程度地提高重用性并允许测量定制。限制：1）仅适用于某些芯片组，例如：Net Gear WG511g v1卡、Lucent ORiNOCO无线卡、Cisco Aironet卡（340和4800系列）、Compaq和Dell内置无线卡（Dell无法获取失败计数）、Linksys卡（不确定）。