Numerical hub-lidar data from LES-generated turbulence boxes using HAWC2 v13.1 and DTU 10MW reference wind turbine

This dataset contains synthetic lidar measurements from a pulsed lidar mounted on the hub / spinner of the DTU 10MW wind turbine model. The data was generated using the numerical hub-lidar sensor feature in HAWC2 v13.1.For the inflow conditions, LES-generated turbulence boxes for wind speeds 8.0, 12.0, 15.0 and 20.0 m/s were used, where 16 different time periods were extracted from a 4-hour LES simulation per wind speed, generating 64 inflow cases.A similar database has been released previously using Mann-generated turbulence boxes for wind speeds of 8.0, 11.4, and 18.0 m/s, under the IEC Normal Turbulence Model.For more detailed information, please refer to the documentation.The dataset and repository were curated at the Technical University of Denmark by Esperanza Soto Sagredo (ORCID 0000-0002-5645-2335, [e-mail]), Jennifer M. Rinker (ORCID 0000-0002-1122-1891, [e-mail]) and Søren J. Andersen (ORCID 0000-0002-5935-751X, [e-mail]).Utilization of this database, in whole or in part, necessitates proper acknowledgment.This work is licensed under a CCBY 4.0 license. Please cite as:Soto Sagredo, Esperanza Andrea; Rinker, Jennifer; Andersen, Søren Juhl (2025). Numerical hub-lidar data from LES-generated turbulence boxes using HAWC2 v13.1 and DTU 10MW reference wind turbine. Technical University of Denmark. Dataset. https://doi.org/10.11583/DTU.28151724This work is part of the CONTINUE project, which has received funding from the Danish Energy Technology Development and Demonstration Programme (EUDP), under grant agreement 640222-496980.