Replication data for: Energy performance and climate dependency for fresh water production from atmospheric water vapour

The Matlab code for plotting the absolute humidity at different relative humidity levels against temperature. Plotted for relative humidity levels of 0.2, 0.4, 0.6, 0.8 and 1 with absolute humidity varying from 0.005 to 0.05 g/g and temperature from -10 to 40°C - Figure 3 Data_Fig8-11: Figure 8: Specific water yield of active cooling technology against the condensation temperature, ranging from 0 to 20°C in A and 0 to10 °C in B, in A) a humid climate (phi = 80%, T = 25°C). Figure 9: Plot of maximum specific water yield as a function of ambient temperature, ranging from 0 to 35°C, at different relative humidity levels (0.2, 0.4, 0.6, 0.8, 1) for water extraction from the air by active cooling. Figure 10: Plot of maximum specific water yield against absolute humidity, ranging from 0 to 0.035 g/g, at different relative humidity levels (0.2, 0.4, 0.6, 0.8, 1) for water extraction from the air by active cooling. Figure 11: Plot of maximum specific water yield against ambient relative humidity, ranging from 0.2 to 1, at different ambient temperature levels (5, 10, 15, 20, 25, 30 and 35°C) for water extraction from the air by active cooling. Data_Fig15-16: Matlab code for generating Figure 15 and 16: Figure 15: Maximum specific water yield of a passive solid desiccant based water-from-air extraction device against ambient temperature, ranging from 0 to 35°C. The curves pertain to different desorption temperatures: 40, 60, 80 °C and no sensible heat. Figure 16: Specific water yield of a passive solid desiccant based water from air extraction device against ambient temperature, at a relative humidity of 40% at different heat of desorption values, 2500, 2900, 3300 and 3700 kJ/L at Tdes = 60°C. Data_Fig20: Matlab code for generating Figure 20: Optimal regions for active air cooling and passive desiccant technologies as a function of ambient temperature, from 0-35°C, and relative humidity values, from 10-100%, based on the theoretical maximum specific yield. Kinetics 30RH.tab: The excell data on which Figure 17 is based. The water uptake as a function of time at a relative humidity of 30% for SMAG (polymer), zeolite 13X, MOF-303 and LiCl (salt) Kinetics 90RH.tab: The excell data on which Figure 18 is based. The water uptake as a function of time at a relative humidity of 90% for SMAG (polymer), zeolite 13X, hydrogel, mesoporous silica gel and LiCl (salt) H.txt: The Matlab function for calculating the moist air enthalpy. This file is needed for running the script to generate the figure. Ps.txt: The Matlab function for the calculation of the saturation pressure of the moisture present in the air. This file is needed for running the script to generate the figure. Ptot. txt: The Matlab function for calculating the total air pressure. This file is needed for running the script to generate the figure. RHa.txt: The Matlab function for determining the absolute humidity of the air. This file is needed for running the script to generate the figure.