Experimental dataset of advanced bio-oil production from low-rank coal using microwave pyrolysis assisted by catalysts and receptors

Data description:
The yield, detailed characterization of LRC, bio-oil, syngas, and bio-char obtained from MP + HZSM-5 + Fe2(SO4)3 and MP + AC + Fe2(SO4)3 are all shown in this dataset. Fig. 1 shows the mineral composition of the HZSM-5 catalyst, as well as the proximate and ultimate analyses of the LRC and AC catalysts. Fig. 2 shows the XRD analysis in the form of the stability of the AC and HZSM-5 catalyst compositions at 550-620℃. Tables 1-2 shows the profile of temperature rise in the ratio of HZSM + Fe2(SO4)3 and AC + Fe2(SO4)3 to LRC, as well as the carbon distribution from the products (liquid, syngas, and bio-char).
At MP + 1.0%HZSM-5 + 24.6%Fe2(SO4)3 and MP + 1.0%AC + 24.6%Fe2(SO4)3, the total weight loss equals the accumulations of liquid yield and syngas yield. Eqs. (1-4) was used to measure the total weight loss.
Y_liquid=(〖(V.ρ)〗_(tray 1)+〖(V.ρ)〗_(tray 2)+ (〖V.ρ)〗_(tray 3)+ (V.ρ)_(tray end))/(m_(low-rank coal) ) x 100% (1)
Y_(bio-char)=m_(bio-char)/m_(low-rank coal) x 100% (2)
Y_syngas=100%-Y_liquid-Y_(bio-char) (3)
Total weight loss (TWL)=Y_liquid+Y_syngas (4)

At MP + 1.0%HZSM-5 + 24.6%Fe2(SO4)3 and MP + 1.0%AC + 24.6Fe2(SO4)3, Tables 3-5 shows the effect of pyrolysis temperature, input power, and reaction time on product yield, as measured by total weight loss, which is the product of liquid and syngas yields. For each MP + 1.0%HZSM + 24.6%Fe2(SO4)3 and MP + 1.0%AC + 24.6Fe2(SO4)3, the total weight loss was determined using Eq. (4) with variables in pyrolysis temperature (570-620°C), input power (0-800 Watt), and reaction time (15-135 minutes). Tables 6 show the GC-MS analysis of relative values of the major pyrolysis components inside the oils, as well as the classification of bio-oil following comparison to standard fuels. The syngas properties at MP + 1.0%HZSM + 24.6%Fe2(SO4)3 and MP + 1.0%AC + 24.6Fe2(SO4)3 are described in Table 7. Fig. 3 describes the physical characteristics of bio-oil: (a) density; (b) viscosity.