电动葫芦门式起重机定期检验收费计算数据

电动葫芦门式起重机定期检验收费计算是根据起重机的具体情况，包括起重机的额定起重量、跨度、起升高度等因素，来确定检验费用的金额。它能够为起重机使用单位提供合理的收费依据，为检验机构提供方便准确的收费标准。1、数据采集：收集电动葫芦门式起重机的额定起重量、跨度、起升高度等参数。2、数据处理：首先根据额定起重量Gn＜5、5≤Gn＜10、10≤Gn＜16、16≤Gn＜25、25≤Gn＜40五个区间，确定收费标准分别为400、450、560、630、700。根据跨度(m)L≤10.5,LX=0;L＞10.5,LX=((L-10.5)/5)*0.1确定跨度系数LX。根据起升高度G≤6,GX=0;G>6,GX=((G-6)/3)*0.05确定起升高度系数GX。3、套用算法公式计算：电动单梁起重机定期检验实收金额=收费标准*（1+跨度系数+起升高度系数+其他情况系数）*检验种类。4、补充说明：①跨度系数LX中的((L-10.5)/5)部分和起升高度系数GX中的((G-6)/3)部分需向上取整，如计算结果为1.2，需取整为2。②其他情况系数依次为含双小车，0.1；含双司机室，0.1；含抓斗，0.1；含起重吸盘，0.1；含起集装箱吊具，0.1；冶金起重机，0.3；有副钩起重机，0.3。其他情况可同时包含多个，系数相加即可。③定期检验的检验种类值为1。

The periodic inspection fee calculation for electric hoist gantry cranes is determined based on the crane's specific parameters including rated lifting capacity, span, lifting height and other relevant factors. This calculation provides a reasonable charging basis for crane users and enables inspection institutions to adopt convenient and accurate charging standards.
1. Data Collection: Collect parameters such as the rated lifting capacity, span and lifting height of electric hoist gantry cranes.
2. Data Processing: Firstly, divide the rated lifting weight Gn into five intervals: Gn < 5, 5 ≤ Gn < 10, 10 ≤ Gn < 16, 16 ≤ Gn < 25 and 25 ≤ Gn < 40, with the corresponding charging standards set as 400, 450, 560, 630 and 700 respectively. Then calculate the span coefficient LX: when the span (in meters) L ≤ 10.5, LX = 0; when L > 10.5, LX = ((L - 10.5)/5) * 0.1. Similarly, calculate the lifting height coefficient GX: when the lifting height G ≤ 6, GX = 0; when G > 6, GX = ((G - 6)/3) * 0.05.
3. Algorithm Application for Calculation: The actual collected amount for periodic inspection of electric single-girder cranes = charging standard × (1 + span coefficient + lifting height coefficient + other condition coefficients) × inspection type.
4. Supplementary Explanations:
① The parts ((L - 10.5)/5) in the span coefficient LX and ((G - 6)/3) in the lifting height coefficient GX shall be rounded up. For example, if the calculation result is 1.2, it shall be rounded up to 2.
② The other condition coefficients are specified as follows: double trolley equipped, 0.1; double operator's cab equipped, 0.1; grab bucket equipped, 0.1; lifting suction cup equipped, 0.1; container spreader equipped, 0.1; metallurgical crane, 0.3; crane with auxiliary hook, 0.3. Multiple applicable conditions can be present simultaneously, and the corresponding coefficients shall be summed up.
③ The value of the inspection type for periodic inspection is 1.

搜集汇总

数据集介绍

特点

该数据集提供了电动葫芦门式起重机定期检验收费的详细计算数据，包括设备参数、收费标准及实收金额等信息，适用于起重机使用单位和检验机构进行收费计算和标准制定。