3D geological models of dolomitized clinoforms and flow simulation results: scenario 2 in Teoh, C.P. et al (2021)

3D geological models of dolomitized clinoforms (10 different realisations) and flow simulation results according to Scenario 2 in Teoh, C.P. et al (2021) doi:10.1016/j.marpetgeo.2021.105344.<br> Models are built using surface-based modelling approach (doi:10.1007/s11004-018-9764-8). Flow simulations are run with IC-FERST, using unstructured tetrahedral meshes that adapt to geological heterogeneity and flow behaviour throughout the simulation to improve simulation quality and performance. For each of the 10 stochastic realisations, 5 geological models are available with corresponding flow simulation results:<br> - Only clinoforms and facies boundaries<br> - 1 dolomite body per clinothem (~20% dolomite)<br> - 2 dolomite bodies per clinothem (~40% dolomite)<br> - 3 dolomite bodies per clinothem (~60% dolomite)<br> - 4 dolomite bodies per clinothem (~80% dolomite)<br> <br> Input model files for simulation are provided in Exodus (.e) and GMSH (.msh) formats.<br> Flow simulation settings are provided for IC-FERST in .mpml files (multifluids.github.io)<br> Flow simulation results are provided as: 3D unstructured adaptive mesh in .vtu format, which can be opened with Paraview (www.paraview.org). Time interval between successive mesh outputs is 1 month. In- and outflow rates and volumetric proportions per phase in .csv Naming of files and folders:<br> <em>Sxxxxxx_yyyyz</em> where:<br> '<em>xxxxxx</em>' is the stochastic seed number used to sample the input statistics and create the geological model<br> '<em>yyyy</em>' is either 'clino' or 'dolo' to indicate if the model represents respectively only clinoforms, or contains dolomite bodies <br> '<em>z</em>' corresponds to the number of dolomite bodies per clinothem