RO-A-RPCMAG-4-AST2-RESAMPLED

Data Set Overview The data from the ROSETTA PLASMA CONSORTIUM (RPC) Fluxgate Magnetometer(MAG)was submitted by Ingo Richter (TM) for the RPCMAG team. The PI of the team is KarlHeinz Glassmeier. The data have been measured during the LUTETIA flyby between July 7, 2010 and July 13, 2010. The closest approach (CA) took place on July 10, 2010 at 15:45 All magnetic field data are calibrated, resampled data. That means the data represent the 3 components of the magnetic field measured in physical units (nT). Calibration has been applied according to the Ground calibration results which means: temperature dependent offset calibration temperature dependent sensitivity calibration temperature dependent misalignment calibration Data are given in different coordinates, dependent on the calibration LEVEL. LEVEL_F : averaged data in s/ccoordinates Source of these data are LEVEL_B data. LEVEL_G : averaged data in celestialcoordinates Source of these data are LEVEL_C data. LEVEL_H : calibrated data in celestialcoordinates, disturbance of S/Creaction wheel eliminated, OB and Burstmode only, Source of these data are LEVEL_C data. Bad vectors have been removed. Any s/c caused residual magnetic fields are not eliminated. The ground temperature model for the sensor calibration has been improved (expanded for a wider temperature range down to 130 deg C) using long term temperature model obtained from flight data. The data are sorted by the sensor (OB: outboard sensor, IB: inboard sensor)and the measurement mode (M1..M6) and average interval (A, where n denotes the average interval in seconds). Data can uniquely be identified by their file names. Averaging means calculating a mean value of of the specified interval in time domain. It does not mean any mixing of data from the OB and IB sensor. Normally the OB is the Primary (Pri) and the IB is the Secondary (Sec) sensor. However, this order can be toggled truncated!, Please see ac [truncated!, Please see actual data for full text]