Methane biofiltration biofilm samples

Dilute methane emissions from dairy barns (500 ppm) are a challenging agricultural greenhouse gas source to abate via biofiltration because their poor solubility makes gas-liquid mass transfer a primary limitation in biotrickling filters (BTFs). We evaluated lab-scale BTFs for treating dairy-relevant CH4 concentrations and tested two enhancement strategies: (1) aerosolized nutrient delivery to improve liquid distribution, and (2) reduced liquid addition rates to increase gas-liquid mass transfer efficiency. Liquid-fed BTFs and aerosol-fed BTFs (ABTFs) packed with scoria or glass beads were compared. Aerosolized nutrients reduced the elimination capacity (EC) compared to biotrickling delivery. Switching from liquid to aerosol decreased an initial EC of 30 g m-3 h-1 by 35% at 2500 ppm CH4, and the original EC was not recoverable. Slower liquid addition consistently improved CH4 removal for both delivery techniques. In a glass bead ABTF at 2500 ppm CH4, the EC increased from 5.5 to 12.4 g m-3 h-1 when the liquid coalescence rate decreased from 0.79 to 0.006 cm h-1. In a scoria ABTF, a 1.5-fold increase in EC was observed as the rate decreased from 2.36 to 0.15 cm h-1. Below a threshold liquid addition rate in the scoria BTF, the EC dropped 33%, likely due to uneven wetting or high pH conditions. Therefore, optimizing liquid delivery can significantly enhance BTF performance for agricultural CH4 mitigation