five

电动自行车动力4820-A电池寿命分析数据

收藏
浙江省数据知识产权登记平台2024-01-12 更新2024-05-08 收录
下载链接:
https://www.zjip.org.cn/home/announce/trends/27068
下载链接
链接失效反馈
官方服务:
资源简介:
在规定的循环寿命测试制度下,分析电动自行车动力电池的容量保持率、放电容量衰减情况对以及应容量的变化率,用于评估该类型电池在长时间循环放电情况下的性能衰减情况、电池性能稳定性分析以及电池使用寿命预测。1.数据来源 在规定的循环寿命测试制度下,循环记录电动自行车动力4820-A电池800次的实时容量数据。 2.数据处理 2.1实时预警 基于电动自行车动力电池放电寿命要求,通过设置监测阈值并实现智能预警,当测试结束时,若循环记录600次中均没有预警,则继续循环至800次,容量保持率取800次的数据;若实时容量低于初始容量60%时,循环过程中有进行预警,则采用预警时的数据作为终止容量,结束循环; 2.2性能衰减变化率 采用以下公式计算电池性能变化相关的参数: (1)容量保持率=实时容量/初始容量*100%; (2)容量衰减率=(初始容量-终止容量)/初始容量*100%; (3)容量变化率=(终止容量-实时容量)/终止容量; 3.数据应用 通过分析电动自行车动力电池的容量保持率、放电容量衰减情况对以及应容量的变化率,用于评估该类型电池在长时间循环放电情况下的性能衰减情况、电池性能稳定性分析以及电池使用寿命预测。

Under the standardized cycle life test regime, this dataset analyzes the capacity retention rate, discharge capacity decay, and capacity change rate of power batteries for electric bicycles, aiming to evaluate the performance degradation, analyze battery performance stability, and predict the service life of this type of battery under long-term cyclic discharge conditions. 1. Data Source Under the standardized cycle life test regime, real-time capacity data of the 4820-A power battery for electric bicycles was cycle-recorded over 800 cycles. 2. Data Processing 2.1 Real-time Early Warning Based on the discharge life requirements of power batteries for electric bicycles, monitoring thresholds are set to enable intelligent early warning. At the end of the test, if no early warning is triggered during the first 600 cycles, the test will continue until 800 cycles, and the capacity retention rate will be calculated using the data from the 800th cycle; if the real-time capacity drops below 60% of the initial capacity and an early warning is triggered during cycling, the data at the time of early warning will be used as the termination capacity to end the test. 2.2 Performance Decay Change Rate Parameters related to battery performance changes are calculated using the following formulas: (1) Capacity Retention Rate = (Real-time Capacity / Initial Capacity) × 100%; (2) Capacity Decay Rate = [(Initial Capacity - Termination Capacity) / Initial Capacity] × 100%; (3) Capacity Change Rate = (Termination Capacity - Real-time Capacity) / Termination Capacity; 3. Data Application By analyzing the capacity retention rate, discharge capacity decay, and capacity change rate of power batteries for electric bicycles, this dataset is used to evaluate the performance degradation, analyze battery performance stability, and predict the service life of this type of battery under long-term cyclic discharge conditions.
提供机构:
杭州天丰电源股份有限公司
创建时间:
2023-12-28
搜集汇总
数据集介绍
main_image_url
特点
该数据集由杭州天丰电源股份有限公司提供,包含830条记录,数据来源于企业,更新频次为按需更新。数据集主要用于分析电动自行车动力4820-A电池的容量保持率、放电容量衰减情况,以及电池性能稳定性分析和使用寿命预测。数据通过循环寿命测试制度下的实时容量数据记录,采用特定的算法规则进行数据处理和分析。
以上内容由遇见数据集搜集并总结生成
二维码
社区交流群
二维码
科研交流群
商业服务