GASCLAY - Uniaxial consolidation test on a reconstituted Boom clay sample

Experimental data from a uniaxial consolidation test performed on a reconstituted Boom clay sample, with an initial water content of 65%. The sample sample was prepared using synthetic pore solution, and it was loaded in steps until reaching ~5000 kPa, including two unloading-reloading loops. This test was performed as part of the GASCLAY project.<br><br><br>

本数据集取自初始含水率为65%的重塑博姆粘土（Boom clay）试样的单轴固结试验。该试样采用合成孔隙溶液制备，试验以分级加载模式进行，直至荷载达到约5000 kPa，过程中包含两次加卸载循环。本试验作为GASCLAY项目的一部分开展。